I have a Dell PowerEdge 2400 server running NT 4.0 with a Perc 2/Si controller for 3 RAID5 drives. Unfortunately, it is very old and I need to upgrade to larger drives without losing any data. Ca...
http://www.experts-exchange.com/Hardware/Misc/Q_20456320.html
Zones:
HardwareDate Answered: 01/14/2003 Grade: A Views: 0
Hi,
My last system(Dell PowerEdge 4400) died because it seems the Perc controller corrupted the main container of RAID5 config, backing up from tape was not 100% successful. We are getting a n...
http://www.experts-exchange.com/Storage/Misc/Q_20539705.html
I have 2 x Dell PE 2600's, setup exactly the same - each had 2 x PERC 3/dc cards, 1 runs a radi1 for the OS, and the other is attached to a PV (200S). The PV cards are jumpered to cluster mode. I...
http://www.experts-exchange.com/Storage/Misc/Q_21320443.html
We have bought a new server.
This server contains 14 disks.
These disks are in a disk cabinet wich is connected to a PERC 4E/DC controller
What is the best setup for the fastest disk i/o throu...
http://www.experts-exchange.com/Storage/Misc/Q_21808120.html
Greetings,
I have a Dell PowerEdge 2650 server with a PERC 3/Di controller. I have two 36 GB drives: drive 0 and drive 1 setup as a RAID 1. That is used for my boot and system drive.
My quest...
http://www.experts-exchange.com/Storage/Misc/Q_22121977.html
I have a Dell PowerEdge 4400 running Win2003 with a PERC 3/Di and 4 Hitachi 36GB disks. I received the server with no OS, configured server using PowerEdge admin, installed OS, etc. From the begi...
http://www.experts-exchange.com/Storage/Misc/Q_22140118.html
Hi all.
I am working on setting up a backup server with a Dell PERC RAID array with Windows 2003 Server. What I would really like to do is to add one drive with (pre-existing) data and a blank ...
http://www.experts-exchange.com/Storage/Misc/Q_21331647.html
We just installed a second PERC 3/DC into a PE6450. We have connected a PV200S to it and would like to determine if there is a way to configure the RAID card so that the PV200S is one logical driv...
http://www.experts-exchange.com/Storage/Misc/Q_21368338.html
Had a RAid 1 container fail with OS. Had & still have RAid 5 for data. Put two new disks in same slots as Raid 1 had but dleted container and added back for new - installed W2k4 OS but gives me e...
http://www.experts-exchange.com/Storage/Misc/Q_21421406.html
Ok, I have a dell perc 3/dc controller with 3.13 firmware from 4/2003 connected to a powervault 200s. When I boot into the configuration (cntrl-M), it takes a while for the controller to try and r...
http://www.experts-exchange.com/Storage/Misc/Q_21426206.html
