Argh!
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxxxxxxxxxxxxxxxxxx enc...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21317101.html
I have a PIX 506 wth PDM Version 3.0(2) and PIX Version 6.3(4)
Currently, I have a block of 4 public addresses.
Address 1 is assigned as the Public PIX interface.
Address 2 is a mail serve...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21545307.html
Folks,I need to setup VPN links between 5 sites,PPTP or IPSEC.Will Cisco PIX 506 work to connect all the 5 sites?Any suggestions pls.
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have a pix that i need to make a configuration change on. We have to TS behind our firewall and setup like this
static (inside,outside) x.x.x.132 192.168.100.206 netmask 255.255.255.255 0 0
...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
When i put in a static NAT statement to one of my private IPs and set the ACL for the port I want open, the host loses internet connectivity. It can ping internally, but can no longer see the outs...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
What are the limitations (length / allowed characters / etc) for a PreShared key for an IPSec tunnel from a PIX to;
a) Another PIX
b) A Cisco VPN Concentrator
c) A Cisco VPN Client
I'm guessi...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
We have a pix with a power issue. We want to replace it with the same model. Can you tell me the easiesy way to transfer the config from any old one to a new one. Tftp transfer or what?
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I'm currently rebuilding my exchange server to a new one. The IP has changed and when i'm ready to move my icoming mail to the new server i nedd to make a change to the pix. I think the only change...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have a cisco 506e pix. I am running Verizon Business DSL with static IPs. I also ordered a block of 5 ip addresses. Right now only one IP is working correctly because I had to hire someone to com...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23381047.html
We have a windows 2003 standard server with one network card and a PIX 506 connecting the network to the internet. We would like to have the PIX create a VPN so users can access the data folder on...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23426591.html
