Hi,
We are installing several IP cameras and I thought it would be good to use a PoE switch. The switch I was looking at a Netgear FS726TP (100Mb with 2x1Gb slots). I would have normally used ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21715311.html
Zones:
RoutersDate Answered: 01/31/2006 Rating: 9.2 Views: 0
I am wiring up a conference and would like to put a 4-8 port switch on each table. We are already going to have a Cisco 3560 POE switch in there to support our wireless WAPs and was wondering if th...
http://www.experts-exchange.com/Networking/Misc/Q_21988961.html
We are buying PoE switches for our new VoIP phone system that is going in. Each of the companies providing a phone bid put a diferent make of switch on the bid. i've always been partial to Linksy...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23256001.html
I am setting up a small 12 user office, they will have and IP PBX server, a win 2k3 domain controller all connected via a 24 port Cisco Linksys SRW2024P. The phones will be connect directly to the ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_24088659.html
Hi There
I have a Cisco 3750 PoE Switch used for both Data and IP Telephony. There 48 ports on the switch are working except two ports Gigabit port 5 and 6.
When I issue the command show inte...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23875889.html
We are in the process of changing our current phone system to one with VOIP capabilities. The phones require CAT5 cabling and according the our vendor, Power Over Ethernet Switches in order to wor...
http://www.experts-exchange.com/Networking/Misc/Q_22090418.html
We are putting a VOIP system in and I am confused on what POE switch will work with the Cisco 7960 phone. i am not sure if we are getting just the 7960 or the 7960G but i can make sure to get one o...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Q_22737517.html
I've got a Cisco3560 POE Switch that we have been migrating users off of to other switches in our facility. What we have been doing to perform this migration is to perform the "sh mac-address tabl...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23117133.html
If I have QoS defined on interfaces, should I/must I have QoS defined on the switch-to-switch trunk ports? In reviewing our configs, I noticed that some of our trunk ports have the QoS-related set...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23419156.html
hi
i have a situation where i have to set up and configure 3com switch (4500 series, 50 port PoE).
i m connecting this switch in a room that has an existing network port(currently one avaya ip p...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23881341.html
