Recently my computer hang while I am surfing, Then I have to reboot it, After rebooting, the system cannot detect the IBM deskstar 5 harddisk. I then swap it to Sec IDE, it works. The PRI IDE can s...
http://www.experts-exchange.com/Hardware/Misc/Q_10078768.html
Zones:
HardwareDate Answered: 09/08/1998 Rating: 6.6 Views: 0
We have 6 trunks coming into our company.
Our problem is that we are getting too many busy signals when outside calls try to get in.
We have 80 DID's and about 80 users.
If we got a PRI, wha...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21781226...
Zones:
VoIPDate Answered: 03/20/2006 Rating: 8.9 Views: 65
Hello experts,
I have the following commands in a router config:
access-code pri 9 direct-inward-dial
secondary-dialtone 9
Dial-peer voice 20 pots
destination-pattern 9T
incomin...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22005757...
Zones:
VoIPDate Answered: 01/06/2007 Rating: 7.8 Views: 0
Hi,
Our company has a PRI and a T1, the first one is for our phone system (Avaya Merlin Legend). From time to time our T1 or PRI or both will go down , sometimes they stay down for 1 min and oth...
http://www.experts-exchange.com/Networking/Telecommunications/Providers/Q_22422379.html
Right now, my company has two telephone that act together to handle the volume of calls that we receive and to provide some level of redundancy.
I have 6 100 digit DID blocks between the switch...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Q_23072714.html
We have an old contract where each phone has its own copper telephone line. We set up our phone system to match line for line.
We are talking since our contract is up to use a PRI but here I ge...
http://www.experts-exchange.com/Networking/Telecommunications/Q_24182501.html
telll me what is the meaning of PRI?which is used in exchange for user connecting of net.
mail me at hfkhalid@hotmail.com
http://www.experts-exchange.com/Networking/Misc/Q_21069627.html
Zones:
NetworkingDate Answered: 11/23/2004 Rating: 7.2 Views: 0
We currently have an integrated T1 with 12 Voice channel (8 trunks, 4 DID) and 768K data. We've had this T1 for 3+ years and have outgrown the data side. We're looking for full T1 speeds for the ne...
http://www.experts-exchange.com/Networking/Broadband/Q_21150246.html
Zones:
BroadbandDate Answered: 11/13/2004 Rating: 7.8 Views: 0
Im curious if we can break off a BRI from a PRI between two sites.
My company runs mission critical applications on half of a 512k point-to-point T1. The other 256K of this point-to-point is...
http://www.experts-exchange.com/Networking/Broadband/Q_21532569.html
Zones:
BroadbandDate Answered: 03/06/2006 Rating: 7.4 Views: 0
Recently when i start my PC it says "not found" next to the pri master/slave, and the PC then tries to boot by looking for a DHCP.
Sometimes it starts normally and others the above happens
W...
http://www.experts-exchange.com/Hardware/Misc/Q_21571261.html
Zones:
HardwareDate Answered: 12/08/2005 Rating: 5.6 Views: 0
