Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 3287(0.003 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

6.2
I am trying to create an environment where I have a PDC and a PBC. My goal is that whenever one of the two computers go down my users will still be able to access to their data. If the data is repo...
Zones: Windows NT NetworkDate Answered: 12/07/1997 Views: 0
Can anyone recommend good RAID 5 system?  I am looking for something fairly affordable, with 10 gig of available storage space.  I would be running it under nw4.11.
Zones: NetwareDate Answered: 05/20/1998 Views: 0
Can anyone give me some insight to Mac services for NT?  I have been informed that there is a maximum volume size of 4 GB when using the Mac services.  I need a way around this.  I have a site whic...
Zones: Windows NTDate Answered: 07/08/1999 Views: 0
I have 2 x 20GB IDE HDD set-up for RAID 1 via Webmin and I'm using Red Hat 7.0. 1. is my RAID 1 set-up working *optimally*? 2. if not how do I optimize it? pls explain clearly. Thank you in ...
Zones: Linux AdminDate Answered: 03/01/2001 Views: 0
Is there a Raid Level higher than Raid 5. Many Thanks
Zones: Windows NTDate Answered: 05/09/2001 Views: 0
I don't know much about RAID, but I could use some help.  I just upgraded my machine to the following setup: MSI K7T266 Pro2-RU Motherboard  -with 4 USB 2.0 ports and 4 USB 1.1 ports (D-Bracket...
Zones: HardwareDate Answered: 02/11/2002 Views: 6
Hi, I am using PERC 3/SC and running RAID 1, i have the following question: 1. Can PERC 3/SC detect bad sector?  If yes, what action it takes?  If no, should i have to check the disk occasio...
Zones: HardwareDate Answered: 05/18/2002 Views: 0
Recently I bought a pc with 3x IBM 120GXP - 2 used for RAID - 1 as backup RAID-drives are partition, containing 1 "C"-partition of around 5gb to install Win-XP in. The backup-drive being D,...
Zones: HardwareDate Answered: 07/04/2002 Views: 9
Recently I bought a pc with 3x IBM 120GXP - 2 used for RAID - 1 as backup RAID-drives are partition, containing 1 "C"-partition of around 5gb to install Win-XP in. The backup-drive being D,...
Zones: Windows XPDate Answered: 10/11/2002 Views: 0
We have a DL380 server with 6*36GB disks and 5i RAID controller. Planning to install SLES 8.0. Can I have some tips to implement RAID 0+1. Thanks
Zones: Operating Systems, L...Date Answered: 09/02/2003 Views: 0