I am using RAID Reconstructor (www.runtime.org) which has been highly recommended on this site. I have a RAID 5 array of 4 (146GB) disks that were attached to an HP SmartArray 5i controller. I've t...
http://www.experts-exchange.com/Storage/Storage_Technology/Q_23062736.html
My raid 0 logical device has failed. In the controller bios no arrays are available it says. In Adaptec Storage Manager it shows the logical device 0 as failed.
I have 2 Seagate 15k 68GB disks o...
http://www.experts-exchange.com/Storage/Backup_Restore/Q_23354615.html
Zones:
...Date Answered: 04/26/2008 Rating: 9.5 Views: 0
I've got 5 free drives that were previously part of a 6-drive hotswap RAID5 (one of the drives is confirmed defective). RAID5 was likely hanging off a PERC4/Di RAID card in a PowerEdge 2600. I've...
http://www.experts-exchange.com/Networking/Network_Management/Disaster_Recovery/Q_24600579...
Hello All,
After my old MSI motherboard fried, I'm moving everything over to a new bargain bin Biostar board I got. The problem being that of course the two boards have different RAID controller...
http://www.experts-exchange.com/Storage/Hard_Drives/Q_23186581.html
I've have a pc with 2x1TB samsung hdd. in raid configuration. I am using raid reconstructor from runtime software. But I am having trouble finding the right start sector and block size. Would be ve...
http://www.experts-exchange.com/Storage/Misc/Q_24538811.html
