Hello,
I'm all new to the ISP world and I just got a feed from an upstream that provides MFN bandwidth. I'm thinking of adding another feed from Global Crossing. But I think I need a router and ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20637556.html
Zones:
RoutersDate Answered: 06/18/2003 Rating: 9.2 Views: 0
Hi, I am studying cisco ip routing in my test lab. I am trying to enable ospf/eigrp routing on my 1720 router with ios verson 12.1(3). When I give 'router eigrp 10' , I get a message 'ip routing n...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21401285.html
Zones:
RoutersDate Answered: 04/27/2005 Rating: 7.2 Views: 0
after a BGP config for a 3rd provider to route internal country traffic thru a IXP center area something funny happened and i don't know if it is related to the config i completed for the IXP or if...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23791574.html
hi ,
i am facing a strange issue , i have bgp between two office , its working fine ,
office one 172.62.62.0
office two 10.2.99.0
now at offcie one they want to chane lan TO 172.52.52.0, ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23913484.html
Zones:
RoutersDate Answered: 11/20/2008 Rating: 7.4 Views: 0
We have two ISP's setup on our network.
RouterA(2600) is on ISPA and routerB(2501) is on ISPB. We have 30 valid IP's on each ISP. Our two routers are connected via the same switch. The DNS is host...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_11882318.html
Zones:
RoutersDate Answered: 11/21/2000 Rating: 8.2 Views: 0
I am trying to redistribute bgp route to our internal network that runs EIGRP. Recently, our vendor requested that we use BGP to connect to their network. We are unable ping the range that they giv...
http://www.experts-exchange.com/Networking/Misc/Q_21898366.html
Zones:
NetworkingDate Answered: 08/22/2006 Rating: 6.0 Views: 0
I have two Cisco 1720 routers. One is suppose to be the backup for the other. The only problem is when I try to configure BGP on the backup router it gives me a "Unknown Routing Protocol" error. ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21949988.html
Zones:
RoutersDate Answered: 08/10/2006 Rating: 7.8 Views: 4
I have 2 edge routers connecting with 2 different ISP;s. (Both are running BGP) What is the best method to control how traffic is routed. We would like to force specif prefixes to use a specific I...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22617197.html
Zones:
Routers,
Ne...Date Answered: 06/06/2007 Rating: 8.2 Views: 0
Hi,
I have a new failover T1 configuration that is currently running on the failover side due to a router being down. I am running BGP with partial routes. Since the install I can not get speed...
http://www.experts-exchange.com/Networking/Broadband/Frame_Relay/Q_21364251.html
Zones:
Frame-RelayDate Answered: 03/25/2005 Rating: 9.0 Views: 4
Ok, just added a mlppp circuit into our existing inet router. We've got three different carriers going into this router now, each exchanging full bgp tables. I'm running into issues where SOME ma...
http://www.experts-exchange.com/Networking/Misc/Q_21482158.html
