I would like to use my SCSI interface to communicate with another system (in developpment). For this purpose, I need to find a library of functions for this SCSI-2 interface.
I use C/C++ and my PC ...
http://www.experts-exchange.com/Programming/Languages/C/Q_10017282.html
Zones:
CDate Answered: 10/11/1997 Grade: C Views: 0
I'd like to replace my SCSI C: drive with a new IDE drive without re-installing WIN95. With my AWARD BIOS, as soon I as cable up the IDE drive it boots as C: I can't see the SCSI drive unless I u...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Win95_3x/95/Win95_S...
Zones:
Win95 SetupDate Answered: 08/14/1997 Grade: D Views: 0
OK. Question is pretty self-explained. What I expect to see:
- reliable CD-burns
- bootable CD support
- PCI-based
- future I may connect scanner to it, and probably SCSI HD
- I'm not tight on budg...
http://www.experts-exchange.com/Hardware/Misc/Q_10044192.html
Zones:
HardwareDate Answered: 03/29/1998 Grade: B Views: 0
I can get afdisk.exe from EZ-SCSI to recognize drive but fdisk from dos can't see it. Does this have anything to do with which target it is?
http://www.experts-exchange.com/Hardware/Misc/Q_10105722.html
Zones:
HardwareDate Answered: 12/08/1998 Grade: A Views: 0
Who can tel how to configure these jumpers for 2 scsi HD's
( I switch between the two for different OS's )
TP to Bus
TP from Drive
Reserved
Parity Disabled
Write Protect
Motor Start Enabled
Delay ...
http://www.experts-exchange.com/Hardware/Misc/Q_10147164.html
Zones:
HardwareDate Answered: 04/12/1999 Grade: A Views: 0
I put my old 300i into an external scsi case, in hopes of using it on my older Performa 466. I don't know if I haven't hooked it up properly or what, but every time I try to start up, the computer...
http://www.experts-exchange.com/Apple/Operating_Systems/Q_10163176.html
Zones:
Apple OSDate Answered: 05/21/1999 Grade: B Views: 0
I'm embarrased this will be one of those DUH questions, but I'm brain dead right now...
MB: QDI Titanium IB
SCSI: Adaptec 2940W
HD: Quantum DSP5053LS (an ancient, decrepit, 535M drive)
Noth...
http://www.experts-exchange.com/Hardware/Misc/Q_10207748.html
Zones:
HardwareDate Answered: 09/23/1999 Grade: A Views: 0
Whenever my PC tries a warm boot the 2940-UW controller can't find the drives. I have a Seagate 2.5 Gb Barricuda, IBM 2.0 GB Raid SCSI drive, a Micropolis 640 MB drive, and an IBM 4X CD drive on t...
http://www.experts-exchange.com/Hardware/Misc/Q_11837558.html
Zones:
HardwareDate Answered: 11/30/2000 Grade: B Views: 0
I have win 2k server with an external SCSI drive. Is there any way to create a volume set (spanned drive) on this? I already tried right clicking the drives in DISK ADMIN and i don't see the opti...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/2000/Q_20130973.htm...
Zones:
Windows 2000Date Answered: 04/05/2003 Grade: A Views: 0
just got a new ecs brd w/Duron 1000 mhz-256 megs pc133 ram-on brd snd-modem and video..only expansion slots(pci)and one Agp slot (4x only),,win98.Currently have a maxtor 8 gb 4000 rpm Hdd,cdr-rw,cd...
http://www.experts-exchange.com/Hardware/Misc/Q_20236406.html
Zones:
HardwareDate Answered: 11/21/2001 Grade: A Views: 0
