We are looking to improve departments file transfer speeds, as it stands they are connected via cat5 with mixed 10/100/1000t connections back to the data room.
I am not an expert on fiber but ...
http://www.experts-exchange.com/Networking/Misc/Q_22094913.html
Hi,
I'm in the process of relocating our office so I'm looking to upgrade where possible. Most workstations have Broadcom Gigabit NIC's installed and I hoping somebody could give me advise on wh...
http://www.experts-exchange.com/Networking/Misc/Q_21731557.html
We are using copprt SFP's, they *should* be 10/100/1000. No matter what we try to connect to one of these four SFP ports, we do not get link. I have tried mutliple devices, each with multiple cable...
http://www.experts-exchange.com/Networking/Misc/Q_21818026.html
I have a 3660 Router with 12.3(14)T7 software. I have installed a NM-1GE, the card passes its self check and i get a green led for the EN led. I am also using a WS-G5484 so we can use fiber. I am c...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21894590.html
Zones:
RoutersDate Answered: 06/22/2006 Grade: B Views: 0
The company has just acquired the building next door. Because of distance we want to run a Fiber Backbone to connect that building with our current one. The new building will need a switch to acc...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Cables/Q_22502509.html
hello
i have aquestion for designe a Core Switches and Edges Switches
if you can help me with this designe
here is the designe
Core 6509 48 PoE 8GB------10 GB(10GBFiber)----Switch1-E 3560 48 Po...
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodolo...
I brought my first gig switch and it's a 3com 2924 with four SFP ports. I am confused what type of cable to use to uplink my existing switch to this port or vice versa, via copper.
Specs said :...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_22955287.html
I am using two GLC-LH-SM's to link two Cisco 2960's (2960G-24TC-L & 2960G-48TC-L) together. I am not able to get this too work.
I'm using a yellow single mode fiber patch cable (LC to ST connec...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_22970021.html
I have bought one 3Com 3870 superstack3 switch and it has 4x SFP ports.
This is my first time that I am using 3Com switch and for this switch I bought two CISCO GLC-SX-MM and Also for SFP for UT...
http://www.experts-exchange.com/Networking/Telecommunications/Providers/ITSPs/Q_23457899.h...
I need to create PCX files to send to SFP. I remember that the really old version of mspaint.exe from windows 3.1 used to support PCX files, but I don't think I can get it. I can create BMP files...
http://www.experts-exchange.com/Web_Development/Fonts/Q_21669755.html
