Hi,
I brief over view have a Netscreen SSG140 that is my router, I have e0/0 as trust, e0/2 as untrust and e0/1 as my DMZ, with e0/3 - e0/9 open, and I also have a PTP to a job site.
What I wou...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_22950546.html
Hi!
I'm upgrading my 10-year old network architecture, and could use some great advice! Here's what I've got now:
- 4 x HP Procurve 4000m 10/100 managed switches connected in a fully meshed t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_22738967.html
Having trouble connecting to my network over the wan using a cisco 2800 to a netscreen ssg140 firewall
the error is
because an initial Phase 1 packet arrived from an unrecognized peer gateway.
...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22405510.html
I want to have a policy defined for a range of IP address (192.168.0.1-192.168.0.99 and 192.168.2.41-192.168.2.99) in SSG140, from trust -untrust. Bu the problem is that I am not able to define the...
http://www.experts-exchange.com/Networking/Security/Q_23509915.html
We have been getting along fine by using the first IP address in the ISP-provided block with NAT and port forwarding. Now, we are about to add a conferencing application and we'd like to use one o...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Q_2379704...
I am trying to retrive trial keys with two SSG140 Netrscreen firewalls. Both have the same problem in that it complains @Request to retrieve license key failed to reach the server by manual retriev...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Q_2323877...
On a NetScreen SSG140, I can setup a security zone (L3) for a custom zone, give it a separate vrouter, and in the routing of that vrouter, put the trust zone's vr as the next hop in order for the c...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23253168.html
Dear Experts,
Is it possible to do VPN routing in Netscreen?
e.g. HK ---> JP have VPN, JP ---> KR have VPN,
So can I route the packet from HK --> KR instead of create a VPN tunnel betwee...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23426570.html
I am trying to MIP an external IP address to a RRAS server internally
I have created the MIP, and I have also (for testing purposes only initially) created an Allow All ACL through the Firewall ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23783689.html
