What is mean by Ramp up and Ramp down?? please more detail..
where can i find the resources about ramp up and ramp down of a stepper motor
http://www.experts-exchange.com/Hardware/Misc/Q_10153307.html
Zones:
HardwareDate Answered: 09/01/1999 Grade: C Views: 9
Hi
i am using stepper motor in my worke ,so some of them does not have data sheets nor drivers and i need to use them and i do not know the driving sequence .
Note some of them is not standard , m...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Win95_3x/95/Q_10135...
Zones:
Windows 95Date Answered: 04/29/1999 Grade: C Views: 0
How are stepper motors constructed?
http://www.experts-exchange.com/Programming/Misc/Q_20433452.html
Zones:
ProgrammingDate Answered: 08/12/2003 Grade: B Views: 17
What i really want to know is how the communication is established...
i know that lpt port has pins for sending data but what really is the data, volts, or what?
what every pin make? i know t...
http://www.experts-exchange.com/Hardware/Misc/Q_20853973.html
Zones:
HardwareDate Answered: 01/19/2004 Grade: B Views: 0
Hello there.Any idea how to use a stpper motor without a driver board. I am doing a project .I want to save some time. Much detailed answer will get full marks.
Mahmood
http://www.experts-exchange.com/Hardware/Misc/Q_21736446.html
Zones:
HardwareDate Answered: 02/15/2006 Grade: A Views: 0
I wish to format a numeric stepper.
Nothing fancy, but I wish to have it always a precision of 2 and leading 0 when < 1
Its for hours, has a min / max of 0.25 / 12.0
I want it to display l...
http://www.experts-exchange.com/Web_Development/Web_Languages-Standards/Flex/Q_23078934.ht...
Zones:
FlexDate Answered: 01/15/2008 Grade: A Views: 35
Has anybody used VB application to control Stepper Motor /Servo Motor. (currently we are using Qbasic, but it has limitations, also we want to use GUI tool for the purpose)
What could be the best ...
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/Q_10145406.html
Zones:
Visual BasicDate Answered: 07/02/1999 Grade: C Views: 71
Hi,
What I am looking for is a stepper motor controller that...
a) is available in the U.K. 'off the shelf'
b) requires no asembly or pic programming
c) has a 9pin RS-232 connector and not sc...
http://www.experts-exchange.com/Hardware/Components/CPU_Processors/Q_20682047.html
Can any one tell me please that how to programme a stepper motor to rotate it and stop it when some buttons are pressed. I am using Atmega8 Microntroller. I need the C code or atleast some ideas h...
http://www.experts-exchange.com/Programming/Misc/Q_21745845.html
Zones:
ProgrammingDate Answered: 03/22/2006 Grade: A Views: 4
Hello,
I am not an expert in PIC programming
I am sure this code is very simple. Can anyone please write this one for me. I will highly apprecite this.
I am controlling my motor using a contro...
http://www.experts-exchange.com/Programming/Misc/Q_22653686.html
