Hi,
We are taking connection from an ISP and they want us to provide a router with 802.1q encapsulation and subinterfaces.
I don't have knowledge of dot1q and I also don't want to buy a costl...
http://www.experts-exchange.com/Networking/Misc/Q_21652416.html
How do you REMOVE a subinterface?
I currently have S0.0 - S0.1 - S0.2 & S0.3
I CANNOT get those to go away. I have removed the IP addresses, shut them down, done a "No Int S0.0" command (whi...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20310366.html
Zones:
RoutersDate Answered: 06/14/2002 Grade: A Views: 0
Ok, this might be a yes or no question. I am running FreeBSD 5.2-Release on a home box as a Cable Router/NAT Gateway. My question is whether or not I can use DHCP on a sub-interface (alias interf...
http://www.experts-exchange.com/Networking/Unix_Networking/Q_20937552.html
1) if you use an interVLAN router, should you apply an ACL for every subinterface?
Or do you apply the ACL just for the trunk link?
2) is the ACL applied inbound or outbound on each sub inter...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21328000.html
Zones:
RoutersDate Answered: 02/24/2005 Grade: A Views: 8
hi
could you please help
how to create subinterface on router 1700
regards
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21660607.html
Zones:
RoutersDate Answered: 12/14/2005 Grade: B Views: 4
I'm going to be hosting several (probably around 20 to 30) terminal servers for remote clients. I'm looking for a recommendation for a Cisco firewall. I'm considering the ASA 5510. Each client will...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21810228.html
Can use HSRP to track serial subinterfaces?
http://www.experts-exchange.com/Networking/Broadband/Frame_Relay/Q_20834583.html
Zones:
Frame-RelayDate Answered: 05/17/2004 Grade: A Views: 0
I have a CISCO 805 router (1 ethernet, 1 serial interface). I would like to connect my LAN to internet using two ISPs for redundancy. The problem is that I can connect to the first one wireless (ne...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20905509.html
Zones:
RoutersDate Answered: 03/12/2004 Grade: A Views: 52
In our addressingg scheme each branch office gets a /24 address space. I want to configure subinterfaces on the Fast ethernet interface to allow for multiple VLANs. If I use vlan 1 as the managem...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20913680.html
Zones:
RoutersDate Answered: 03/10/2004 Grade: A Views: 0
This subinterface:
interface Serial0/0.2 point-to-point
ip address 225.134.55.223 255.255.255.252
ip nat outside
no ip route-cache
no ip mroute-cache
frame-relay interface-dlci 18 IETF...
http://www.experts-exchange.com/Networking/Misc/Q_20976444.html
Zones:
NetworkingDate Answered: 05/04/2004 Grade: A Views: 4
