Advertisement

1 - 10 of 113 containing alltags:("tecra") (0.001 seconds)
Hello ISDN experts !! I'm not able to surf on my ISDN line provided by GTE California.  GTE has helped me a lot, but without results.  I'm using a Toshiba Tecra 740 CDT (bought in April 97).  I ha...
Zones: HardwareDate Answered: 10/19/1997 Grade: C Views: 0
On a Toshiba Tecra 800 notebook using WinNT 4.0 with SP5.  Notebook can't shutdown but restarts itself.  Please help
Zones: Windows NTDate Answered: 10/30/2000 Grade: B Views: 0
Does anybody have a XF86Config file for my Tecra 780DVD laptop? Many thanks Moe
Zones: Linux SetupDate Answered: 07/11/1999 Grade: A Views: 0
Hello, how can I get a Xircom Cardbus RBEM-56G/100-BTX PCMCIA-Card work under Sol8? The Card supports ISDN/CAPI 2.0, analog 56k and Network 10/100 MBit. The Tecra 8000 has a ToPIC97 PCMCIA-C...
Zones: Solaris, Sun JDSDate Answered: 05/08/2001 Grade: C Views: 0
I have a Toshiba Tecra 500CS laptop whose original hard drive is a 1.26GB. I purchased a 20GB to replace the old hard drive. I was told by the seller that I need to have the bios recognize the new ...
Zones: HardwareDate Answered: 04/11/2002 Grade: A Views: 0
I just picked up a Toshiba Tecra 510cdt at a thrift store and after powering it up, the password box came up with "self" as the user....I tried several guesses and was shut out each time.... How...
Zones: General Microsoft OSDate Answered: 11/21/2002 Grade: A Views: 0
I have a Toshiba Tecra 9100 as my primary machine running Suse 9.1 - just upgraded from Suse 9.0 over the weekend. I also have a Apricorn USB harddrive kit that I've used to make a backup of my ...
Zones: Linux AdminDate Answered: 09/26/2004 Grade: A Views: 0
I'm using a Toshiba Tecra 8000 laptop (366 Mhz CPU and 128 MB RAM) with a PCMCIA D-Link wireless card, DWL-G650 HW ver C2 and FW ver 3.1.6 on an ISP that supports 366 Mhz CPUs. The laptop is a...
Zones: HardwareDate Answered: 01/12/2005 Grade: A Views: 0
Hello I have a Toshiba Tecra S1 that will not boot.  When powered on, it displays the Toshiba screen, then the screen goes blank and hangs.  The issue may have been caused by a hard drive that w...
Zones: HardwareDate Answered: 03/28/2005 Grade: A Views: 0
I recently upgraded the firmware on my D-Link access point, DWL-7100AP, from version 1.0 to version 2.00au, this fixed an issue with the number of MAC's that could be recorded against the AP from 1...
Zones: GeneralDate Answered: 04/27/2006 Grade: B Views: 0