Advertisement

1 - 10 of 75 containing alltags:("trixbox") (0 seconds)
Hi Guys. I dont know all that much about VoIP, but as I am an idiot I agreed to build and manage a big VoIP project, so here goes. I am managing a VoIP Virtual Reception system where Home bas...
Zones: VoIP, Asterisk Date Answered: 04/16/2008 Grade: A Views: 0
I think i did a restore on the Trixbox with an older file to convert a few settings and since i did i get alot of errors that look like this: (they cause the web portal to not display correctly, ho...
Zones: PHP installation, Linux, VMS / OpenVMSDate Answered: 10/20/2008 Grade: B Views: 19
I have a situation where people call directly on a number, this plays a wav file then forwards the call to a ring group (in ring all mode), this then rings all phones once which are in the static l...
Zones: Asterisk , VoIPDate Answered: 05/29/2008 Grade: B Views: 0
i installed a trixbox with a panasonic. I make calls ok betwen them, but i want to pass the panasonic number to trixbox...for example if 107 (panasonic number extension) calls to ip extension (what...
Zones: VoIP, ITSPsDate Answered: 09/10/2008 Grade: A Views: 8
Hi, I am running Trixbox 2.2.4 and I want to configure it so that each night at say 2.00am it reboots itself. How do I configure this in linux? Thanks Mark
Zones: IP Telephony, LinuxDate Answered: 07/09/2008 Grade: B Views: 17
Your Linux Distribution: (Redhat CentOS release 4.4 (Final)) Your FreePBX version: (2.2.1) Your Kernel version: (Linux asterisk1.local 2.6.9-34.0.2.EL #1 Fri Jul 7 19:24:57 CDT 2006 i686 i686 i38...
Zones: Software, IP TelephonyDate Answered: 05/01/2007 Grade: A Views: 0
Hi, I've set up a call manager express (ver 3.3) and a trixbox (ver 2.2).  I can call to the phones on the trixbox from the call manager by using a dial-peer but I have no idea how to call the oth...
Zones: VoIPDate Answered: 06/18/2007 Grade: B Views: 16
I am running Trixbox 2.2 on CentOS4.4. I am planning to set up a call center environment on Trixbox. I am looking into a way to create phantoms (hot desk profiles) on Trixbox.I need agents and empl...
Zones: Linux, Telecommunications, ...Date Answered: 09/17/2008 Grade: A Views: 4
I have just (well nearly!) finished setting up my second TrixBox - I opted to use Trixbox Version 2.0 after having all sorts of problems with V2.2 and my Digium card. I have a Digium Card with 1...
Zones: Misc, Linux Setup, bashDate Answered: 08/18/2007 Grade: A Views: 47
I've deployed a Smoothwall 3.0 Linux Firewall solution where my Trixbox PBX sits behind it along with about a dozen softphones extensions.   I don't need to allow inbound connection to my PBX from ...
Zones: VoIP, Net SecurityDate Answered: 08/22/2007 Grade: A Views: 0