We are converting over are network from class b to class C addresses and have come up against a problem with changing over the BIG IP system. We run three VLANs and for some reason when we change o...
http://www.experts-exchange.com/Networking/Misc/Q_21266790.html
Zones:
NetworkingDate Answered: 01/20/2005 Grade: A Views: 0
Trunking
Trunking is two or more ports grouped together and acting as one logical path. This can be used to increase the bandwidth between two switches. Also, in some cases, these paths can prov...
http://www.experts-exchange.com/Networking/Misc/Q_21646704.html
Hey All,
I currently have a catalyst 3560g switch and I am about to purchase a catalyst 2960/g both switches have sfp ports. So I am going to also purchase the sfp modules. I was wondering if t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22043104.html
Zones:
RoutersDate Answered: 10/31/2006 Grade: A Views: 0
Hi Guys,
Does anyone know if you need network cards that support teaming to support a network trunk of can you just use any old network cards.
i.e. dell server with built in 3com card, can i ...
http://www.experts-exchange.com/Networking/Misc/Q_20896372.html
Trunk between 2900xl and 2948g. Why is it not working?
_____________________________________________________
_____________________________________________________
2900xl#show int fa0/22 switchp...
http://www.experts-exchange.com/Networking/Misc/Q_20914744.html
Currently I have 2 fabrics consisting of the following switches:
Fabric 1 includes:
Switch1 domain id 1
Switch2 domain id 2
Switch5 domain id 3
Fabric 2 includes:
Switch3 domain id 1
...
http://www.experts-exchange.com/Storage/Misc/Q_21067299.html
I'm trying to set up a solution that will allow an external vendor to connect to our internal network (two systems only). Here's the question, the way that I have set it up doesn't work and I thin...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21100834.html
I attempting to trunk between a 3550 switch and 7200 router. There are several vlans that I want going over the trunk. But some devices on certain vlans are not reachable from the router or even th...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21219268.html
Zones:
RoutersDate Answered: 03/13/2005 Grade: A Views: 0
I have two catalyst 2950 switches on two different sites and 4 (four) 2mbps DSL links going from one site to the other. I would like to know witch is the simplest configuration for setting up a tru...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21586942.html
Zones:
RoutersDate Answered: 10/18/2005 Grade: B Views: 4
Hi,
My company just purchased a PIX 535 and wanted to configuring trunking to support two VLANs on one physical interface. From reading some of the posts, it seems like 6.3 and above does suppo...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21591274.html
