Enter Keywords:
1 - 7 of 7(0.011 seconds)
Sort By:
 
All switch is the layer 2 switch. Case 1. pc1----sw1----sw2----pc2 all port of sw1 is on untagged vlan 10 all port of sw2 is on untagged vlan 20 The port that link between SW1 and SW2 doesn'...
Zones: Networking, Net...Date Answered: 04/18/2006 Rating: 7.6 Views: 0
I am trying to make sense of the different voice vlan options... "switchport voice vlan {vlan-id | dot1p | untagged | none}" The vlan-id option is used to specify a specific VLAN to use for v...
Zones: VoIP, Switches / Hubs, R...Date Answered: 01/11/2008 Rating: 8.4 Views: 246
Hi I have a qestion abou VLAN tagging. It's not easy to explain, but I'll give it a try :) We have a Netscreen-50 FW. Interface 2 we have tagget into 3 different subnets. The FW is connected to...
Zones: RoutersDate Answered: 12/21/2004 Rating: 7.0 Views: 0
Hello, Have 1 hp 3400CL switch and about 3 2650's. What i want to do is link them all up and have the VLAN information that is configured on the 3400cl to propagate to the other switches. how d...
Zones: Switches / HubsDate Answered: 09/03/2007 Rating: 9.4 Views: 0
I need to setup a couple of VLAN's on our network. I have created the VLAN's on the switches, but need to add a port to the DEFAULT VLAN as tagged but have it untagged in the other 3 VLAN's . The s...
Zones: Net...Date Answered: 06/08/2009 Rating: 8.7 Views: 34
Hello everybody. I'm new in VLAN configuration, i've read lots of information and manuals about them but i'm having problems configuring VLAN's. I've a HP Switch 2650 with two VLAN's created....
Zones: Networking, Net...Date Answered: 11/29/2006 Rating: 7.8 Views: 0
I am new to configuring switches and am currently configuring some Force 10 Network Switches (similar IOS to Cisco) - I have been trying to read up on some 'Best Practices' for switches and securit...
Zones: Network Vulnerabilities, Networking Hardwa...Date Answered: 01/07/2009 Rating: 7.8 Views: 28
 
  • 1