I have two networks and two NT servers.
My PDC is connected to Network A
My BDC is connect to both A & B
Routing between the two networks is done via the BDC
I have a workstation on network B. Thi...
http://www.experts-exchange.com/Networking/Windows_Networking/NT/Q_10036416.html
I just read a book, which says the maximum nodes for a ETHER network is 1024, and for FDDI is 500, for Token Ring is 260. Is there anyone can tell me why they are 1024, 500, and 260. Are the maxim...
http://www.experts-exchange.com/Networking/Novell_Netware/Q_10068973.html
Zones:
NetwareDate Answered: 08/03/1998 Rating: 6.6 Views: 0
I am considering using a no routed vlan within a DMZ, ie instead of having a dedicated switch for that DMZ, simply create a vlan (without creating any layer 3 interfaces) and assign any ports accro...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20255020.html
Zones:
RoutersDate Answered: 01/17/2002 Rating: 7.0 Views: 0
How to configure Trunk for VLAN, in order for VLAN talk to each other on Cisco Catalyst Multilayer 3550-48 switch,
The following is the vlan diagram,
Port VLAN VLAN IP ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20293656.html
Zones:
RoutersDate Answered: 05/02/2002 Rating: 6.6 Views: 0
I had draw a network design for a building. i segmented the network into several Vlan. each vlan is connet using switch, and this switches are connect to a more high speed switch (enterprise switc...
http://www.experts-exchange.com/Networking/Misc/Q_20445425.html
Hi @all,
first time here, so a big hello to all.
My company wants me to buy a new firewall, but:
- VLAN functionality is a must
- HA / Loadbalancing would be fine
- 2xFE or GBIC Uplink
- ...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_20518783.html
I've shared Internet connections using cheap broadband routers in the past, but have come across a (common?) problem this time round.
In this case there are two small companies in the same buil...
http://www.experts-exchange.com/Networking/Misc/Q_20545178.html
I have a cisco 3548. At the cli entering the command "show Vlan" I get back
VLAN Name Status Ports
---- -------------------------------- --------- ---------------...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20672080.html
Zones:
RoutersDate Answered: 07/08/2003 Rating: 9.8 Views: 0
Can anyone out there help me!!!!
I have a network running on a 10.x.x.x private address range, the company is growing like a mad wild thing and im soon goona run out of IP addresses as well as the...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20715859.html
Zones:
RoutersDate Answered: 11/19/2003 Rating: 6.2 Views: 0
Currently we have multiple VLANS that reside behind a PIX 515. We have an internal DNS server to perform resolution to internal servers via an external FQN. This was setup because our PIX does n...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_20820145.html
