I have a FIC VB-601 motherboard and Award BIOS. The computer hangs during POST right after detecting primary and secondary IDE devices (while initializing option roms). Checked BIOS setup and the +...
http://www.experts-exchange.com/Hardware/Misc/Q_10387676.html
I have a computer that is a couple rooms away in my house. I don't want to go through the trouble of running a cat5 cable through me roof. I'm thinking whether this would be possible: to get or mak...
http://www.experts-exchange.com/Networking/Misc/Q_10847921.html
With VIO Voltage of 3.3 V I have the following problems:
- Cannot reboot (Monitor black, speaker is beeping)
- The result of 2D Benchmark (Passmark V 3.4) is very bad
- System crashes sometime...
http://www.experts-exchange.com/Hardware/Misc/Q_20148614.html
Zones:
HardwareDate Answered: 07/23/2001 Rating: 8.6 Views: 0
This is probably an opinion question. I will give poitns accordingly.
What is the maximum core voltage that can be acheived safely no an Athlon XP? Does this depend on the CPU?
I am runnin...
http://www.experts-exchange.com/Hardware/Misc/Q_20792495.html
Zones:
HardwareDate Answered: 11/14/2003 Rating: 5.0 Views: 0
I have a SOYO SY-5SSM motherboard with an AMD K6-2 400mhz cpu. I want to upgrade to the max K6-2 that my board will support which is an amd K6-2 550mhz. My question is: will my power supply have en...
http://www.experts-exchange.com/Hardware/Misc/Q_10428317.html
I have an Intel LT430TX mobo that will support up to a 233 mmx processor, I've been running a 100 mhz in it for a few months now with no problems. I just recently dropped a brand new Intel 233 mmx ...
http://www.experts-exchange.com/Hardware/Misc/Q_10787641.html
VCore Voltage under the sub menu of POWER MANAGEMENT of BIOS shows me an error because the +12V currently was +10.1 and keep up and down in the range of +10V - +11V. What's wrong with this?
http://www.experts-exchange.com/Hardware/Misc/Q_20347882.html
not really related to computer hardware, anyway:
why do accumulators (e.g. mignon, type AA or AAA) only have a voltage of 1.2V
and not like the equivalent batteries 1.5V ?
http://www.experts-exchange.com/Hardware/Misc/Q_20979926.html
Zones:
HardwareDate Answered: 10/31/2004 Rating: 8.2 Views: 0
I just built a computer from a biostar kit. It came with a Biostar M7NCD Ultra motherboard. The install went excellent, no problems. When I am in Windows however and am running the hardware monitor...
http://www.experts-exchange.com/Hardware/Desktops/Q_21033977.html
Hi,
I have my system 2.4c @ 3.0 GHz (overclocked)
Motherboard Asus P4P800 Deluxe.
I was checking the asus probe voltage and the +3.3V is actual between 3.184V - 3.2, (no more than 3.2)
Qu...
http://www.experts-exchange.com/Hardware/Misc/Q_21253468.html
