I have a soundblaster 16 sound card which I installed in DOS and win-os2 using the drivers which came with the card.
After a fresh bootup and while starting my first win-os2 session I would get an...
http://www.experts-exchange.com/OS/OS_-_2/OS2_Setup/Q_10019035.html
Zones:
OS/2 SetupDate Answered: 08/05/1997 Grade: B Views: 0
Where are the screen savers in warp 3.0. I can't find them anywhere?
http://www.experts-exchange.com/OS/OS_-_2/Q_10031831.html
Zones:
OS / 2Date Answered: 12/11/1997 Grade: B Views: 0
STEP BY STEP CONFIRMING THE SYSTEM COMMANDS IN CONFIG.SYS FILE AT BOOT UP OR SYSTEM STARTUP.
http://www.experts-exchange.com/OS/OS_-_2/OS2_Setup/Q_10227247.html
Zones:
OS/2 SetupDate Answered: 02/22/2002 Grade: A Views: 0
I am trying to install and configure a 3com pcmcia card to use DHCP via an SMC router connected to a cable modem. I've set TCP/IP to DHCP but on boot up I get a message that says DHCP client did n...
http://www.experts-exchange.com/Networking/OS_-_2/Q_21016314.html
I have following problem with Warp 4.
When booting the system, startup.cmd is in foreground until the desktop
is setting up. Once the desktop is up, startup.cmd looses the focus.
This is a problem ...
http://www.experts-exchange.com/OS/OS_-_2/Q_10020741.html
Zones:
OS / 2Date Answered: 08/21/1997 Grade: C Views: 0
Hi,
I have problem and I need help installing Warp Connect on the machine that I just purchased. I threw out Win95 that come pre-installed and reformat the harddrive, clean.
The machine's motherb...
http://www.experts-exchange.com/OS/OS_-_2/OS2_Setup/Q_10031420.html
Zones:
OS/2 SetupDate Answered: 12/17/1997 Grade: A Views: 0
I tried to install fix 4 for warp 4. Everything goes fine but when I reboot it freeze on the Warp logo indefinitely. It does not go further.
I use the French version of Warp 4
I use the English ve...
http://www.experts-exchange.com/OS/OS_-_2/OS2_Setup/Q_10033746.html
Zones:
OS/2 SetupDate Answered: 12/31/1997 Grade: A Views: 0
I have just bought my self a P2 300mhz system,it's using an ATI expert@work agp card,and a IBM 6,4gb uata disk,and 64mb sdram,my problem is when opening a os/2 session(window or fullscreen)and copy...
http://www.experts-exchange.com/OS/OS_-_2/Q_10035099.html
Zones:
OS / 2Date Answered: 01/10/1998 Grade: B Views: 0
When I enable automatic DHCP on my Warp 4.0 client
station, it errors out on bootup saying that it cannot
find the DHCP server. If I change the system to a
static IP address, then everything wo...
http://www.experts-exchange.com/Networking/OS_-_2/Q_10036094.html
What's the secret to changing TCP/IP setting for OS/2
Warp 3 ( WINS and DNS IP address ) ? I tried to change
them but the file won't save.
http://www.experts-exchange.com/OS/OS_-_2/OS2_Setup/Q_10047578.html
Zones:
OS/2 SetupDate Answered: 04/29/1998 Grade: A Views: 13
