hi ,
I have a probelm with executing AT-Commands with my WaveCom GSM module.
I am using VC++ and Commport calss as my serial port interface.
My related code is simple and looks like below :
...
http://www.experts-exchange.com/Networking/Wireless/Standards/GSM/Q_20741330.html
Zones:
GSMDate Answered: 06/26/2004 Rating: 7.0 Views: 0
My AT Commands that successfully sends a SMS:
Send: "AT\r\n" expect "OK"
Send: "AT+WIND=0\r\n" expect "OK"
Send: "AT+CNMI=2,2,0,0,0\r\n" expect "OK"
Send: "AT+CSMP=17,169,0,...
http://www.experts-exchange.com/Networking/Wireless/Standards/GSM/Q_20871487.html
Zones:
GSMDate Answered: 02/04/2004 Rating: 8.8 Views: 9
Hi.
Im trying to receive a sms into hyperterminal from a wavecom v.dot origo 1800 gsm modem.
ATE1 // app - init modem for AT
OK // gsm OK
AT+CPIN=1234 // app send pin
OK // gsm OK
...
http://www.experts-exchange.com/Networking/Wireless/Standards/GSM/Q_20990388.html
Zones:
GSMDate Answered: 06/20/2004 Rating: 4.0 Views: 46
Hello. i have a problem. I m student of IT in denmark. I have developed surveillance application using IP kamera. Application saves an image when movement is detected and overwrite it when next mov...
http://www.experts-exchange.com/Networking/Wireless/Standards/GSM/Q_21402392.html
Zones:
GSMDate Answered: 05/08/2005 Rating: 8.4 Views: 5
Hello. i have a problem. I m student of IT in denmark. I have developed surveillance application using IP kamera. Application saves an image when movement is detected and overwrite it when next mov...
http://www.experts-exchange.com/Database/GIS_and_GPS/Q_21405446.html
Hi EE
I have the above modem which I would like to use to be able to send sms.
I have connected it to my pc via the comms port but when I try to send any at commands to it via hyperterminal, ...
http://www.experts-exchange.com/Networking/Wireless/Standards/GSM/Q_21649185.html
Zones:
GSMDate Answered: 12/06/2005 Rating: 7.8 Views: 14
While using wavecom q2403a module,we found it can't attach to network for a long time,even power off the modlue.but if change a SIM card ,it can attach to network immediately,and if change to old S...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_21675162.html
Zones:
GPRSDate Answered: 02/17/2006 Rating: 7.2 Views: 9
I'm trying to setup a Q2426B Wavecom modem to navigate using the GPRS channel.
Given the following sequence:
AT+CREG?
+CREG: 1,2
OK
AT+CREG=1
OK
+CREG: 2
AT+CREG?
+CREG:...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_21067049.html
Zones:
GPRSDate Answered: 08/17/2004 Rating: 7.8 Views: 4
can anyone please tell me howto set up the GPRS.
I have a Wavecom GSM/GPRS modem i want to connect to the internet using this wireless modem.I have the GPRS account activated.My machine runs on wi...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20540675.html
Zones:
GPRSDate Answered: 05/26/2004 Rating: 7.0 Views: 43
Hello all,
I have a Wavecom Fastrack modem and a GPRS line, running on a Windows XP system. I have tried some of the suggestions listed here but none of them worked as described.
Was able to ...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20656084.html
Zones:
GPRSDate Answered: 05/26/2004 Rating: 7.2 Views: 73
