I brought home a 1601R cisco router from work
The cisco 1601R has a serial DB 60 port for the WAN connection
and also a slot to put in a WIC card which in my case has nothing in it yet.
My q...
http://www.experts-exchange.com/Networking/Misc/Q_21208128.html
Zones:
NetworkingDate Answered: 11/16/2004 Grade: A Views: 0
I think I have two cards out on my router, but I don't really know how to test this cards without hooking them to a T1 or something like that (then finding out there is now functionality)
WIC (sam...
http://www.experts-exchange.com/Networking/Misc/Q_21257573.html
Zones:
NetworkingDate Answered: 12/30/2004 Grade: A Views: 0
hello experts, i just inherited a 2600 router with a VWIC-1MFT-E1 card, can i use the said equipment to route my E1 internet? if not what card would i need to plug into the router?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21755401.html
Zones:
RoutersDate Answered: 03/01/2006 Grade: A Views: 0
Hi,
Any Cisco technical expert can help me, i hope.
Right now we are using Microsoft ISA Server for firewall, VPN, Internet sharing etc. I would like to replace it with a CISCO pix firewall Plu...
http://www.experts-exchange.com/Networking/Broadband/Q_21761892.html
Zones:
BroadbandDate Answered: 06/04/2006 Grade: A Views: 0
I have 2 new cisco 1720 routers with T1 dsu/csu wics that will be setup on either side of a leased line. Is there a way I connect these together directly for testing before I ship the one off to t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20657582.html
Zones:
RoutersDate Answered: 06/25/2003 Grade: A Views: 0
I am trying (unsuccessfully, so far) to get a 1ENET card to work in a 1720 router.
Here's the start of a show tech-support:
Cisco Internetwork Operating System Software
IOS (tm) C1700 Softwar...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21078755.html
Zones:
RoutersDate Answered: 08/02/2004 Grade: A Views: 0
I have a cisco router 2610, how would I make this go on the internet? would I just need a 2611, which lets me have 2 ethernet ports, one for external and other for internal? or would I need one o...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21089683.html
Zones:
RoutersDate Answered: 08/11/2004 Grade: A Views: 0
I have a ptp t1 between two sites, with a cisco 2600 (with 12.3) with a WIC-1DSU-T1 in each router. I've been having some issues with the t-1 dropping out, and have been told that it's a timing is...
http://www.experts-exchange.com/Networking/Misc/Q_21223701.html
I have a new cisco 2611xm router and i purchased the WIC-1DSU-T1 off of ebay. The T-1 circuit isn't here yet so i can't actually test the WIC (or can I?) When i bring the WIC up and do a show int...
http://www.experts-exchange.com/Networking/Misc/Q_21229569.html
I powered down my cisco 1720 router, which was working fine, and removed the CSU/DSU T1 WIC. I installed a WIC-1ENET card in slot 0 and another one in slot 1. It is my intention to connect one c...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21233663.html
Zones:
RoutersDate Answered: 12/20/2004 Grade: A Views: 0
