Browse All Articles
> Hyper-V Configuring for seamless access to your VM
If you have Windows 8 Pro or EnterPrise and need to use Hyper-V on your machine look no further.
I previously published on my blog : http://hiteshgoldeneye-techtalk.blogspot.com/2013_07_01_archive.html
and thought I would also share with the EE community.
In this Article, I will explain how you can start using Hyper-V up on your machine but before I get into the usage instructions I would like you to read the below link to understand how you can enable Hyper-V on your machine
Once you have enabled Hyper-V and created a Virtual Machine the next step is to be able to access this VM seamlessly. The way you can achieve this is listed below-
Goto Hyper-V Console and click on Virtual Switch Manager
Select the network type as Internal and click Create Virtual Switch. This network switch enables your guest Virtual Machine to communicate with the host machine.
Next run ncpa.cpl in your host machine's run window. Right click the Internal network adapter and click properties. Double click on Internet Protocol Version 4 (TCP/Ipv4). Fill values as shown in the below pic
Next run ncpa.cpl in your guest virtual machine. Right click the Internal network adapter and click properties. Double click on Internet Protocol Version 4 (TCP/Ipv4). Fill values as shown in the below pic
Now is the time to experience the amazing seamless access to your virtual machine. RDP from host machine into your virtual machine by typing the IP Address of your VM. (192.168.2.102).
No issues with display resolution or clipboard access