<

[Product update] Infrastructure Analysis Tool is now available with Business Accounts.Learn More

x

Windows 2008 R2, Trouble with Connecting to a Buffalo NAS Device

Published on
3,720 Points
720 Views
Last Modified:
Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them.

Troubleshooting Steps:
  • Command line: net view \\servername | NOPE
    • System error 53 has occurred, the network path was not found
  • Command line: net view \\192.168.1.x | NOPE (note: ping the actual IP address of the device)
  • Command line: net view /cache | Server is viewable but still get "System error 53"
  • Disabled Firewall | NOPE
    • Services Windows Firewall
  • Disabled Antivirus | NOPE
  • Tried to connect from another Windows 2008 R2 server, OK no issues.
  • Checked Network Settings, IP, DNS, WINS all the same (except the actual IP DUH!)
  • Ping both the NETBIOS name and IP address | OK
  • Clear and Reset: arp, nbtstat, ipconifg (from an elevated command prompt)
    • Elevated command prompt: arp -d
    • Elevated command prompt: nbtstat -R (must be capitalized)
    • Elevated command prompt: ipconfig /flushdns
    • Wait a few moments...
    • Elevated command prompt: nbtstat -RR (must be capitalized)
    • Elevated command prompt: ipconifg /registerdns
  • No errors in either Application log or the System log.
  • Ensured the SMB1 and SMB2 are installed working and enabled.
    • Powershell prompt: Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters" SMB1 -Type DWORD -Value 1 -Force
    • Powershell prompt: Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters" SMB2 -Type DWORD -Value 1 -Force
    • Restart System must do for the above to take effect and before doing the below…
    • Elevated command prompt: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
    • Elevated command prompt: sc.exe config mrxsmb10 start= auto
    • Elevated command prompt: sc.exe config mrxsmb20 start= auto
    • Restart again (and if you have been doing this as long as I have you start to think are we back in the days of Windows 3.11)
  • Validated the Local Security policies (secpol.msc) | Security Settings > Local Policies | Security Options
    • Review all the policies "Network access:" with the machine that does work and make contact to the buffalo device.
    • Do not delete either update or add, and document what your changes are (before and after) so if this breaks something else you can take it back.
  • Review the Workstation services settings: HKLM\SYSTEM\CurrentControlSet\services\LanmanWorkstation\Parameters to those of the working server.
    • My change wound up being the "RequireSecuritySignature" value needed to be 0 (Disabled)



Name
Type
Data


(Default)
REG_SZ
(value not set)


EnablePlainTextPassword
REG_DWORD
0x00000000 (0)


EnableSecuritySignature
REG_DWORD
0x00000001 (1)


OtherDomains
REG_MULTI_SZ



RequireSecuritySignature
REG_DWORD
0x00000000 (0)


ServiceDll
REG_EXPAND_SZ
%SystemRoot%\System32\wks


ServiceDllUnloadOnStop
REG_DWORD
0x00000001 (1)




Reboot so the changes take effect, test and hope this works for you as well.
0
0 Comments

Featured Post

CompTIA Cloud+

The CompTIA Cloud+ Basic training course will teach you about cloud concepts and models, data storage, networking, and network infrastructure.

Discover the basics of using Outlook 2016 from office 365.
I've published three five-minute Experts Exchange video Micro Tutorials that describe terrific features in an excellent, free PDF product called PDF-XChange Editor: How to rotate pages in a PDF with free software (https://www.experts-exchange.com…

Keep in touch with Experts Exchange

Tech news and trends delivered to your inbox every month