I previously wrote an article addressing the use of UBCD4WIN and SARDU. All are great, but I have always been an advocate of SARDU. Recently it was suggested that I go back and take a look at Easy2Boot in comparison.
There are many ways to create a bootable/multiboot USB device. A multiboot device allows you to choose which image you wish to boot from for each occasion. In this way one device can serve innumerable purposes.
As USB thumbdrives get larger and less expensive, it only makes sense to use one for more and more tasks. Currently I have a 128gb USB3.0 thumbdrive that serves many purposes. Up until now I have used SARDU (article on an earlier version of SARDU)
to create my multi boot devices. I may continue to do so, or I may not; that is one of the reasons why I started writing this article -- to help me decide and in the process to help anyone else as well.
There are several reasons I started looking into Easy2Boot as an alternative to SARDU. The first was a comment in an early question here
(I contributed a rather long list in this question - just a warning); the second was a summary of a question here
. I decided after that last question that Easy2Boot needed further analysis.
You may have many ISO (CD/DVD images) already. If you do, you may have a way in which you name them in order to make the differences clear to you. For instance, if you have an image of the a Windows installer for Windows 7 that is for 64 bit machines and has a volume license key, you may name it something like Windows_7_64bit_install_vl
.iso. Or if you use a USB multiboot tool already that expects certain names (like SARDU), the same ISO may be named something like InstallWin7_x64_vl.iso (SARDU requires the installer ISO for Windows 7 be named Installwin*.iso where the * can be anything. So installwin7_x64_vl.iso could also be installwin7_x32_vl.iso; the menu option in SARDU would differentiate the two.
This is all to say that I have hundreds of ISOs with sometimes strange names. SARDU takes care of that automatically, Easy2boot, by default, uses whatever strange name the ISO has as the menu name. So if you have an antivirus ISO named rescue-cd-3.16.ISO, the Menu name will be rescue-cd-3.16 (if you haven't enabled extensions in the menu "Show extensions" -- I did this by mistake at first and the name was rescue-cd-3.16.ISO), even though it is in reality the F-Secure rescue disk image. This is the default and can be changed, but like everything else, you need to teach yourself how to do this.
Unfortunately, this means either changing the menu display options, using the menu text creator or changing the names of the ISO images themselves. I opted to use the menu text creator to change some of the names of the images that resided on the stick, not the originals. The create menu items works well, although not graphically oriented. I just dragged the ISO/payload file over the \_ISO\docs\E2B Utilities\E2B TXT Maker.cmd file and it asked to create a menu item and help item. Then when it creates the menu it uses the text file it created instead of the file name.
The menu editor, \_ISO\E2B_Editor.e
xe, is not quite as good. I have tried it several times already and each time it has problems and the interface is somewhat confusing. I will definitely need to read more on the Easy2Boot blog.
The menu editor can be made to work, but I still think it is a work in progress.
Personally, I think they both need better GUI Menus, but since they work and are basically intuitive, I'll leave that item for now. But in case you are interested, the default Easy2Boot and SARDU menus, when booted from a USB device, look similar to these screenshots:
This is the Easy2Boot menu after I used the menu editor to change the background, and font colors:
I really like the interface that SARDU version 3 has. It is clean and very easy to use and understand. On the other hand, it is limiting in terms of how many Windows installs you can have and which programs you can have. It is also not as easy to add extra menu items as in Easy2Boot. Easy2Boot is much easier when it comes to adding new ISOs and there doesn't seem to be a limit on the number of Windows installers. Although I am used to the SARDU configuration and its quirks, I could get used to Easy2BootEasy2Boot as well.
The downsides I have already mentioned make me want to stay with SARDU, not to mention the fact that I invested in it financially by buying the pro version. Easy2Boot makes it easier to add new items and items of your own as well as changing the menu, the menu background and doing multiple installs. I do like SARDU's GUI interface when creating the bootable device, as well as how easy it makes it to download all the necessary ISOs.
The biggest con to Easy2Boot may be its biggest pro as well. I hate the fact that I have to create a text file for every ISO/payload file in order for the menu to look any good. At the same time Easy2boot makes it so easy to create these files and lets you put help information in them as well (such as whether they will appear for only 32 bit, 64 bit or both architectures, or just to ask everytime). You can see in the above customized menu that I created text items for each ISO and the menu looks much cleaner. The other selling point for Easy2Boot is the way in which you can add new ISOs and even new folders. It is as easy as drag and drop and rebuilding the menu.
I have currently filled all but 30gb of a 128gb (115gb usable) thumbdrive. I copied most of the ISOs I use on my SARDU created drive and some others.
What I am not sure of is why the menu needs to be recreated each time you reboot, and why it doesn't seem to recognize my Solid State drive.
I believe in the future I will use both SARDU and Easy2Boot, the former to download the ISOs and the latter to put them together on a USB bootable device. It has become apparent to me that Easy2Boot is truly easier to use and modify. I was never one to do something just because it was harder to do in a certain way, rather the opposite.
If you choose to use Easy2Boot, be careful downloading it. Like many websites these days there are big download buttons that really download adware, or are Google ads. You can watch this 4.5 minute video
if you are unsure. The video only covers the very basic usage of Easy2Boot and skips over some things. I would be happy to assist anyone if they have difficulties.