Certification: CCNA Cisco Certified Network Associate - Interconnecting Cisco Networking Devices Part 2

Category
Networking
Level
Advanced
Lessons
433
Duration
17h 10m 15s
Last Updated: 2018-10-16
The Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 2 (ICND2) course. This exam tests the participant's knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network. The exam covers topics on extending switched networks with VLANs; VLSM and IPv6 addressing; the VTP, RSTP, OSPF, and EIGRP protocols; determining IP routes; configuring, verifying, and troubleshooting VLANs; managing IP traffic with access lists; NAT and DHCP; establishing point-to-point connections. It also establishes Frame Relay connections. Career Path: CCNA Routing and Switching is for network specialists, network administrators, and network support engineers with 1-3 years of experience. The certification can lead to jobs as a network technician, support engineer, systems engineer, and network operations engineer.

CCNA, CCNP, and Cisco are registered trademarks or trademarks of Cisco Systems, Inc. All other trademarks mentioned on this site are the property of their respective owners.
Cisco Certified Network Associate (CCNA) Routing and Switching is a certification program for entry-level network engineers that helps maximize your investment in foundational networking knowledge and increase the value of your employer's network. The CCNA Routing and Switching validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks.

Certification Exam Details:
200-105 ICND2: Learn more about this certification exam.
Category
Networking
Level
Advanced
Lessons
433
Duration
17h 10m 15s
ICND Part 2 Module 01 - Implementing Scalable Medium-Sized Networks
ICND Part 2 Module 02 - Troubleshooting Basic Connectivity
ICND Part 2 Module 03 - Implementing an EIGRP-Based Solution
ICND Part 2 Module 04 - Implement Scalable, Multiarea Network, OSPF Solution
ICND Part 2 Module 05 - Wide-Area Networks
ICND Part 2 Module 06 - Network Device Management
Ken Mayer
As a certified Microsoft Instructor, I’ve focused my career on various security aspects of computer and network technology since the early ’80s. I’ve worked on a wide variety of IT training and high-level consulting projects for Fortune 500 companies worldwide. Through the course of my extensive career, I have taught a full line of Microsoft, CompTIA, Cisco, and other high level IT Security curricula.
Ken MayerMicrosoft Instructor
Other Courses by Ken Mayer