Live Online

Interconnecting Cisco Networking Devices, Part 1 v3.0

$3,495.00 USD$3,145.50 USD
Get discounts withPremium
Member discount will apply to your offsite enrollment
  • About
  • Curriculum

Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0 is a five-day, instructor-led training course that teaches learners how to install, operate, configure, and verify a basic IPc4 and IPv6 network, including configuring a LAN switch, configuring an IP router, managing network devices, and identifying basic security threats.


  • Basic computer literacy
  • Basic PC operating system navigation skills
  • Basic Internet usage skills
  • Basic IP address knowledge


Upon completing the course, students will be able to meet the following objectives:

  • Install, configure, and operate a small-to medium-sized network

Intended Audience

  • Network Engineers
  • Network Administrators
  • Network Support Technicians
  • Help Desk Technicians

About the Author

NterOne is a global training and consulting company focusing on live online IT training courses, self-paced e-learning, private onsite training, consulting, and software focused on the training industry.
Posted: 20 December, 2016

Module 1: Building a Simple Network

  • Lesson 1: Exploring the Functions of Networking
  • Lesson 2: Understanding the Host-to-Host Communications Model
  • Lesson 3: Introducing LANs
  • Lesson 4: Operating Cisco IOS Software
  • Lesson 5: Starting a Switch
  • Lesson 6: Understanding Ethernet and Switch Operation
  • Lesson 7: Troubleshooting Common Switch Media Issues

Module 2: Establishing Internet Connectivity

  • Lesson 1: Understanding the TCP/IP Internet Layer
  • Lesson 2: Understanding IP Addressing and Subnets
  • Lesson 3: Understanding the TCP/IP Transport Layer
  • Lesson 4: Exploring the Functions of Routing
  • Lesson 5: Configuring a Cisco Router
  • Lesson 6: Exploring the Packet Delivery Process
  • Lesson 7: Enabling Static Routing
  • Lesson 8: Learning the Basics of ACL
  • Lesson 9: Enabling Internet Connectivity

Module 3: Summary Challenge

Module 4: Building a Medium-Sized Network

  • Lesson 1: Implementing VLANs and Trunks
  • Lesson 2: Routing Between VLANs
  • Lesson 3: Using a Cisco IOS Network Device as a DHCP Server
  • Lesson 4: Implementing RIPv2

Module 5: Network Device Management and Security

  • Lesson 1: Securing Administrative Access
  • Lesson 2: Implementing Device Hardening
  • Lesson 3: Configuring System Message Logging
  • Lesson 4: Managing Cisco Devices
  • Lesson 5: Licensing

Module 6: Summary Challenge

Module 7: Introducing IPv6

  • Lesson 1: Introducing Basic IPv6
  • Lesson 2: Understanding IPv6 Operation
  • Lesson 3: Configuring IPv6 Static Routing

Lab Outline

Discovery 1: Getting Started with Cisco CLI

Challenge 1: Implementing the Initial Switch Configuration

Discovery 2: Perform Basic Switch Configuration

Discovery 3: Observe How Switch Operates

Discovery 4: Troubleshoot Switch Media and Port Issues

Discovery 5: Inspect TCP/IP Transport Layer

Discovery 6: Start with Cisco Router Configuration

Discovery 7: Configure Cisco Discovery Protocol

Challenge 2: Implementing the Initial Router Configuration

Discovery 8: Configure Default Gateway

Discovery 9: Exploration of Packet Forwarding

Discovery 10: Configure and Verify Static Routes

Challenge 3: Implementing Static Routing

Discovery 11: Configure and Verify ACLs

Challenge 4: Implementing Basic Numbered and Named ACLs

Discovery 12: Configure a Provider-Assigned IP

Discovery 13: Configure Static NAT

Discovery 14: Configure Dynamic NAT and PAT

Discovery 15: Troubleshoot NAT

Challenge 5: Implementing PAT

Challenge 6: Establish Internet Connectivity

Challenge 7: Troubleshoot Internet Connectivity

Discovery 16: Configure VLAN and Trunk

Challenge 8: Troubleshooting VLANs and Trunk

Discovery 17: Configure a Router on a Stick

Challenge 9: Implement Multiple VLANs and Basic Routing Between the VLANs

Discovery 18: Configure a Cisco Router as a DHCP

Discovery 19: Troubleshoot DHCP Issues

Challenge 10: Implement a DHCP Server in a Cisco IOS Device

Discovery 20: Configure and Verify RIPv2

Discovery 21: Troubleshooting RIPv2

Challenge 11: Implementing RIPv2

Discovery 22: Enhance Security of Initial Configuration

Discovery 23: Limit Remote Access Connectivity

Challenge 12: Secure Device Administrative Access

Discovery 24: Configure and Verify Port Security

Discovery 25: Configure and Verify NTP

Challenge 13: Implement Device Hardening

Discovery 26: Configure Syslog

Challenge 14: Configuring System Message Logging

Challenge 15: Implement a Medium-Sized Network

Challenge 16: Troubleshoot a Medium-Sized Network

Discovery 27: Configure Basic IPv6 Connectivity

Discovery 28: Configure IPv6 Static Routes

Challenge 17: Implement IPv6 Static Routing

This is a certification course.
By completing this course, you are eligible for certification opportunities. This course provides the instruction and educational material needed to prepare for a third-party certification exam.
This is a course package.
Course packages provide a comprehensive learning plan at a discounted price, and may lead to certification opportunities.