Solved

Problems!!!

Posted on 1997-01-16
1
363 Views
Last Modified: 2013-12-15
null
0
Comment
Question by:sven122696
1 Comment
 

Accepted Solution

by:
fraser122896 earned 50 total points
ID: 1626777
You should read the file /usr/src/linux/Documentation/cdrom/ide-cd ... it lists common problems that would cause your CD to not be autodetected.  Are you sure that your CDrom is IDE-ATAPI compliant ... if it's an older CDrom then it may require a special driver.

X is "too big" because your virtual resolution is set higher than your mode (actual resolution).  This is from the "Screen" section of /etc/XF86Config
Modes       "1024x768i"
Virtual     1024 768

For the screen to not be too big, your Virtual resolution must match the resolution your are actually using - 1024x768, 800x600, etc.

Netscape cannot find it's own DNS server probably becuase you have not defined one for your self.
/etc/resolv.conf should contain at least one line like:  nameserver 1.2.3.4  (ask your ISP for the nameserver you should be using)

You should also be issuing some commands besides pppd, like: route add default gw 1.2.3.4
(where 1.2.3.4 is the remote IP address which you should see in minicom - or maybe not?).
0

Featured Post

Enterprise Mobility and BYOD For Dummies

Like “For Dummies” books, you can read this in whatever order you choose and learn about mobility and BYOD; and how to put a competitive mobile infrastructure in place. Developed for SMBs and large enterprises alike, you will find helpful use cases, planning, and implementation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Daily system administration tasks often require administrators to connect remote systems. But allowing these remote systems to accept passwords makes these systems vulnerable to the risk of brute-force password guessing attacks. Furthermore there ar…
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Connecting to an Amazon Linux EC2 Instance from Windows Using PuTTY.
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question