• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 189
  • Last Modified:

Monitor Types

I have an IOComm CM 4028.  Which happens to not be supported by Windows 95.  And apparently, the company is out of business or something. . . The thing is that I would like to be able to run my monitor at higher resolution than 640x480 considering that it should be good up to 1024x768.  If it makes any difference, I have all the speck on the monitor and will include them below in case there is another type that matches the monitor you might know of out there.  Oh and I'm running an S3 Trio64V+ video card.  Thanks
sgray@atmos.umd.edu
Monitor Specks:
CRT 14", 90deg deflections
Phosphor/Dot Pitch P22, 0.31mm/0.28mm
Horiz Scan Freq:  31.5kHz/35.2kHz/35.5kHz
Vert Scan Freq:  50~90Hz
Video Bandwidth:  40MHz(-3dB)
Color Display:  Unlimited
Display Resolution:  1024x768
There are more specks but that should be enough.
0
sgray011697
Asked:
sgray011697
1 Solution
 
nedellCommented:
you should be able to use generic svga display type when you run setup for 95.
go to control panel\display\settings\change display type. just pick the standard svga type and reboot your machine. this works fine on my system and I can get all the way to 768x1024 with 24bit color although things slow down considerably after 256 colors.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now