?
Solved

NT to UNIX via com3

Posted on 1997-01-24
1
Medium Priority
?
352 Views
Last Modified: 2013-12-23
I run a small network of 3 pc's using NT4 Server and 2 Win95 workstations.
I also have an HP-UX network machine which I want to connect my server to via Com3, as Com2 is already used for a dialup modem to the internet, and Com1 is the mouse port.
How do I get NT to recognise Com3, and what address and IRQ settings should it have, and then how do I run Telnet via Com3.
0
Comment
Question by:clarknigel
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 3

Accepted Solution

by:
ot earned 200 total points
ID: 1558806
NT will recognize Com3 as soon as you install the hardware for it, as long as there are no conflicts on IRQ or I/O-base. Just remember that unlike DOS/Windows, NT will not allow shared interrupts, so don't give Com3 it's standard IRQ which is 4 (like Com1).

For running a serial host connection, use Hyperterminal.

0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
An article on effective troubleshooting
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Do you want to know how to make a graph with Microsoft Access? First, create a query with the data for the chart. Then make a blank form and add a chart control. This video also shows how to change what data is displayed on the graph as well as form…

718 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question