Solved

Etherexpress Pro/10+

Posted on 1997-02-03
2
193 Views
Last Modified: 2010-03-17
For some reason I can't get this card to work right under Linux. I am using kernel 2.0.0 and if I try to compile the kernel with support for a etherexpress pro/10, then it won't even recognize at boot. But, if I load it as a module (eepro.c), and specify the irq and io, then it finds it, but doesn't add the gateway to the routing table. And it won't let me add it manually, it does weird stuff. I know the chipset is different on the pro/10+ and pro/10. I wrote to the writer of eepro.c, no response on a version that's compatible with the pro/10+. Can anyone help?? Is there a newer kernel that supports it???
0
Comment
Question by:andrew012597
2 Comments
 
LVL 2

Accepted Solution

by:
dux earned 200 total points
ID: 1584164
Try to use kernel 2.0.27 or newer with the file eepro100.c that is compatible with pro/10+. Download eepro100.c from http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
0
 

Expert Comment

by:dmoberg
ID: 1584165
The pro/10+ is either a pci or isa card. If pci, use eepro100.c. If isa, as of July 1998,
none of the drivers work for this card, even if it happens to recognize the card.
(At least I have not succeeded; but one time, like the questioner,
it was recognized but nothing would happen with getting packets on the wire.)
Somewhere someone suggested replacing the pci probing in eepro100.c by isa
probing; no one has stepped up to the plate (and released the source anyway).
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
This video discusses moving either the default database or any database to a new volume.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now