I'm going to install an Adaptec SCSI card (1520) for using
an HP scanner under Linux.
It's not clear to me if the only thing I have to do for properly
installing the SCSI controller is to recompile the kernel to
include the SCSI support, or if I have to do any other operation.
I've read the SCSI How-to, but it seems not to say much.
This infographic explains ransomware, type of malware that blocks access to your files or your systems and holds them hostage until a ransom is paid. It also examines the different types of ransomware and explains what you can do to thwart this sinister online threat.
rdate is a Linux command and the network time protocol for immediate date and time setup from another machine. The clocks are synchronized by entering rdate with the -s switch (command without switch just checks the time but does not set anything).
How many times have you wanted to quickly do the same thing to a list but found yourself typing it again and again? I first figured out a small time saver with the up arrow to recall the last command but that can only get you so far if you have a bi…
Learn how to find files with the shell using the find and locate commands.
Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.: