Solved

Linux PPP (LCP) FAILS

Posted on 1997-02-26
1
370 Views
Last Modified: 2010-03-18
i have tried to connect to my ISP thru PPP and the chat program.. i get and error about LCP then it fails...

# /var/adm/messages
Feb 12 21:21:11 vOiD chat[392]: Checking authorization, Please wait...^M
Feb 12 21:21:11 vOiD chat[392]: Annex username: -- got it
Feb 12 21:21:11 vOiD chat[392]: send (MY LOGIN^M)
Feb 12 21:21:11 vOiD chat[392]: expect (word:)
Feb 12 21:21:11 vOiD chat[392]:  MY LOGIN^M
Feb 12 21:21:11 vOiD chat[392]: Annex password: -- got it
Feb 12 21:21:11 vOiD chat[392]: send (MY_PASSWORD^M)
Feb 12 21:21:11 vOiD pppd[391]: Connected...
Feb 12 21:21:12 vOiD kernel: ppp: channel ppp0 mtu = 1500, mru = 1500
Feb 12 21:21:12 vOiD kernel: ppp: channel ppp0 open
Feb 12 21:21:12 vOiD pppd[391]: set kernel debugging level to 0
Feb 12 21:21:12 vOiD pppd[391]: Using interface ppp0
Feb 12 21:21:12 vOiD pppd[391]: Connect: ppp0 <--> /dev/modem
Feb 12 21:21:12 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:12 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:15 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:15 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:18 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:18 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:21 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:21 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:24 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:24 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:27 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:27 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:30 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:30 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:33 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:33 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:36 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:36 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:39 vOiD pppd[391]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:21:39 vOiD pppd[391]: LCP: sending Configure-Request, id 1
Feb 12 21:21:42 vOiD kernel: ppp_ioctl: set debug level 2, netpacket 0
Feb 12 21:21:42 vOiD pppd[391]: Connection terminated.
Feb 12 21:21:42 vOiD pppd[391]: set kernel debugging level to 2
Feb 12 21:21:42 vOiD kernel: ppp: channel ppp0 going down for IP packets!
Feb 12 21:21:42 vOiD kernel: ppp: channel ppp0 closing.
Feb 12 21:21:42 vOiD pppd[391]: Exit.
Feb 12 21:33:57 vOiD pppd[426]: pppd 2.1.2 started by XXXXX, uid 0
Feb 12 21:33:57 vOiD pppd[426]: Connecting with </usr/sbin/chat -v "" ATZ OK ATDT*70,3912257 CONNECT ^M sername: stephen word: ncaas**>
Feb 12 21:33:58 vOiD chat[427]: send (ATZ^M)
Feb 12 21:33:58 vOiD chat[427]: expect (OK)
Feb 12 21:33:58 vOiD chat[427]: ATZ^M^M
Feb 12 21:33:58 vOiD chat[427]: OK -- got it
Feb 12 21:33:58 vOiD chat[427]: send (ATDT*70,3912257^M)
Feb 12 21:33:58 vOiD chat[427]: expect (CONNECT)
Feb 12 21:33:58 vOiD chat[427]: ^M
Feb 12 21:34:17 vOiD chat[427]: ATDT*70,MY ISP PHONE#^M^M
Feb 12 21:34:17 vOiD chat[427]: CONNECT -- got it
Feb 12 21:34:17 vOiD chat[427]: send (^M^M)
Feb 12 21:34:18 vOiD chat[427]: expect (sername:)
Feb 12 21:34:18 vOiD chat[427]:  24000/ARQ/V34/LAPM/V42BIS^M
Feb 12 21:34:19 vOiD chat[427]: ^M
Feb 12 21:34:19 vOiD chat[427]: ^M
Feb 12 21:34:19 vOiD chat[427]: Annex Command Line Interpreter   *   Copyright (C) 1988, 1995 Xylogics, Inc.^M
Feb 12 21:34:19 vOiD chat[427]: ^M
Feb 12 21:34:19 vOiD chat[427]: Checking authorization, Please wait...^M
Feb 12 21:34:19 vOiD chat[427]: Annex username: -- got it
Feb 12 21:34:19 vOiD chat[427]: send (MY _LOGIN^M)
Feb 12 21:34:19 vOiD chat[427]: expect (word:)
Feb 12 21:34:19 vOiD chat[427]:  MY LOGIN^M
Feb 12 21:34:19 vOiD chat[427]: Annex password: -- got it
Feb 12 21:34:19 vOiD chat[427]: send (MY_PASSWORD^M)
Feb 12 21:34:19 vOiD pppd[426]: Connected...
Feb 12 21:34:20 vOiD kernel: ppp: channel ppp0 mtu = 1500, mru = 1500
Feb 12 21:34:20 vOiD kernel: ppp: channel ppp0 open
Feb 12 21:34:20 vOiD pppd[426]: set kernel debugging level to 0
Feb 12 21:34:20 vOiD pppd[426]: Using interface ppp0
Feb 12 21:34:20 vOiD pppd[426]: Connect: ppp0 <--> /dev/modem
Feb 12 21:34:20 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:20 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:23 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:23 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:26 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:26 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:29 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:29 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:32 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:32 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:35 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:35 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:38 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:38 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:41 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:41 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:44 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:44 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:47 vOiD pppd[426]: fsm_sdata(LCP): Sent code 1, id 1.
Feb 12 21:34:47 vOiD pppd[426]: LCP: sending Configure-Request, id 1
Feb 12 21:34:49 vOiD pppd[426]: Interrupt received: terminating link
Feb 12 21:34:49 vOiD pppd[426]: fsm_sdata(LCP): Sent code 5, id 2.
Feb 12 21:34:50 vOiD pppd[426]: Interrupt received: terminating link
Feb 12 21:34:52 vOiD pppd[426]: fsm_sdata(LCP): Sent code 5, id 3.
Feb 12 21:34:55 vOiD kernel: ppp_ioctl: set debug level 2, netpacket 0
Feb 12 21:34:55 vOiD pppd[426]: Connection terminated.
Feb 12 21:34:55 vOiD pppd[426]: set kernel debugging level to 2
Feb 12 21:34:55 vOiD kernel: ppp: channel ppp0 going down for IP packets!
Feb 12 21:34:55 vOiD kernel: ppp: channel ppp0 closing.
Feb 12 21:34:55 vOiD pppd[426]: Exit.

What am i doing wrong.. i am connecting thru modem and i thought i had edited all the files i needed to.. obviously NOT! ...
please help me if you can : )
0
Comment
Question by:root022697
1 Comment
 

Accepted Solution

by:
rayc021897 earned 50 total points
ID: 1584145
You are logging into an ANNEX. Is the annex config for ppp direct from login?  or do you need to login and start a ppp session.  It appears that you are not getting ppp packets from the the ANNEX.

Ray

rayc@indy.net

0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
url shaping application 8 54
What antennae works with Linux? 7 83
Debian 8.5 networking quits working every couple of hours 13 104
Video Streaming 6 75
I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
This tutorial gives a high-level tour of the interface of Marketo (a marketing automation tool to help businesses track and engage prospective customers and drive them to purchase). You will see the main areas including Marketing Activities, Design …
This video shows how to use Hyena, from SystemTools Software, to bulk import 100 user accounts from an external text file. View in 1080p for best video quality.

803 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question