Solved

Make dosemu problem

Posted on 1997-03-01
1
230 Views
Last Modified: 2010-03-18
When I try to do "amke" as it says in the dosemu quickstar I get:

make[1]: No rule to make target `usr/src/linux-2.0.0/Makefile', needed by `include/kversion.h'. Stop.

What is the problem here?

Curt
0
Comment
Question by:cdfolstr
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 1

Accepted Solution

by:
ggeens earned 100 total points
ID: 1584065
This indicates that your configuration went wrong.

I had this problem myself, and doing `make pristine', followed by ./configure should solve it.

(You do have your kernel source under /usr/src/linux? dosemu won't compile if it can't find your kernel source.)
0

Featured Post

Stressed Out?

Watch some penguins on the livecam!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

615 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question