Solved

MOUNT JAZZ DRIVE

Posted on 1997-03-07
1
288 Views
Last Modified: 2013-12-16
I have a sparc ultra1 with solaris 2.51 and CDE 1.01
I want to mount a 1GB scsi jazz drive
please help
0
Comment
Question by:bsuri030797
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 1

Accepted Solution

by:
hrumayor earned 50 total points
ID: 1811813
Well you will have to read the manuals that come with the drive.
On Solaris 2.3 and later systems, format will automatically configure and label SCSI drives, so that  they need  not  be  defined in format.dat

1)log in as root and type

#touch /reconfigure

that will foce a reconfiguration of the devices.

2)power down the system

#poweroff

3)conect the jazz drive to the scsi chain, place a terminator if needed the new dirves of wide-scsi auto terminate the cahain.

4) change the scsi id to an unused one, and turn on the power of
the jaz drive

5) power on the ultra 1

6) press stop A simultaniously wile it is booting

7) a prompt with a Ok will apear type

ok probe-scsi

a list of all scsi devices will apear, if the jaz drive apears and all the old devices you had there are no scsi confilcts

8) type in ok prompt
ok boot -r
will force system reconfiguration
the system should reboot.

9) login as root again, the jazz deive should apear in /dev/dsk/c?t?d?s? the leters mean c contoler number, t target the scsi id you placed, s slice.

format the new jazz deive, inser the madia before.

type:
#format

and format the jazz deive, be very careful in not formating other disks.

 
10) make a new file system
type newfs /dev/dsk/c?t?d?s? where ? are the coresponding numers in your personal hardware

11) mount the files system
 create a mount point

#mkdir /jazz

mount it

#mount /dev/dsk/c?t?d?s? /jazz

add a line in the file /etc/vtstab to mount and unommunt easily the jazz deive

etc.



0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This tech tip describes how to install the Solaris Operating System from a tape backup that was created using the Solaris flash archive utility. I have used this procedure on the Solaris 8 and 9 OS, and it shoudl also work well on the Solaris 10 rel…
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
Learn how to get help with Linux/Unix bash shell commands. Use help to read help documents for built in bash shell commands.: Use man to interface with the online reference manuals for shell commands.: Use man to search man pages for unknown command…
In a previous video, we went over how to export a DynamoDB table into Amazon S3.  In this video, we show how to load the export from S3 into a DynamoDB table.

738 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question