Solved

USR Sports

Posted on 1997-03-14
3
230 Views
Last Modified: 2010-03-18
I have US Robotics Sportster ISDN TA.  I have the UniLinx module for it.  The module loads up fine and the card initializes fine because after I load them, the card rings when i call it.  The problem is that I can't get it to dial out and start a PPP connection.  

So if you have gotten a Sportster ISDN to connect, please tell me what software you used and exactly how you did it.


PS. My kernel is compiled with ISDN support.
0
Comment
Question by:mwaisdn
  • 2
3 Comments
 

Author Comment

by:mwaisdn
ID: 1584214
Adjusted points to 205
0
 

Author Comment

by:mwaisdn
ID: 1584215
Adjusted points to 415
0
 
LVL 2

Accepted Solution

by:
wk earned 410 total points
ID: 1584216
Have you make the symbolic like of /dev/modem to the IDSN modem device, remember Un*x and clones treats all devices as files.  You may be initialzating the orginal device file, and the communication packages may initial /dev/modem.

I hope the information can help you.
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
In a recent question (https://www.experts-exchange.com/questions/29004105/Run-AutoHotkey-script-directly-from-Notepad.html) here at Experts Exchange, a member asked how to run an AutoHotkey script (.AHK) directly from Notepad++ (aka NPP). This video…

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question