?
Solved

tcp/ip access under Dos/Win-OS2

Posted on 1997-03-30
1
Medium Priority
?
427 Views
Last Modified: 2013-12-23
I am having trouble getting both dos and win-os2 sessions to connect to the internet.  I first noticed the problem trying to use a Win3.1 plugin, but I have done some testing and discovered that not even dos ping will work.  I have tried uninstalling and reinstalling OS/2 internet support, and the two necessary drivers are in my config.sys.  Also, I have the proper path and set etc statements in my dos autoexec.bat.  Also, in terms of Win-OS/2, I have only one winsock.dll file in the path.  I am using Injoy 1.0 to connect to the internet.  All of my OS/2 sessions have not problem accessing the internet.  
0
Comment
Question by:dgiambalvo
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 

Accepted Solution

by:
gprichar earned 200 total points
ID: 1558322
Are you using OS/2 3.0 (aka Warp) and TCP/IP 3.0 or later? The TCP/IP RESOLV and HOST files for OS/2 and for DOS are kept in different places since the OS/2 TCP/IP and MPTN stacks were "converged". The OS/2 TCP/IP control info is in the \MPTN\ETC\ dir (RESOLV2 and HOSTS files) while for DOS sessions, the files RESOLV (no "2") and HOST reside in \TCPIP\DOS\ETC. These files are text files and con be edited. Try backing up the DOS RESOLV and HOST files and then copy the OS2 RESOLV2 file to the DOS RESOLV files and do the same for the HOSTS files.

If you're trying to go through a SOCKS filewall from WinOS2, down load the SOCKSCAP (16-bit) program from NEC's website. Good luck.
0

Featured Post

What is SQL Server and how does it work?

The purpose of this paper is to provide you background on SQL Server. It’s your self-study guide for learning fundamentals. It includes both the history of SQL and its technical basics. Concepts and definitions will form the solid foundation of your future DBA expertise.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
This program is used to assist in finding and resolving common problems with wireless connections.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
Suggested Courses

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question