Solved

TCP/IP Win 3.11

Posted on 1997-04-05
8
249 Views
Last Modified: 2013-12-16
How can I implement TCP/IP on a Novell Network 3.12 using VLM's which I beleive will alow multiple protocols my clients are running w 3.11 There doesnt seem to be any options to do so unless you use WFWG or W95 but I know it can be done
0
Comment
Question by:btp
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 2
  • 2
8 Comments
 

Author Comment

by:btp
ID: 1775224
Edited text of question
0
 

Expert Comment

by:mittalk033197
ID: 1775225
You will not be able to do this in any simple/worthwhile manner unless you use WFW 3.11 or W95. I do understand the need to implement this using a completely out dated version of Win. I have the soln. and will be happy to give it to you if you yet need it. But, I would recommend you rather upgrade to a higher version of Win. If you do this in 3.0 or 3.1 you will have severe memory conflicts and system crashes.
0
 

Expert Comment

by:mittalk033197
ID: 1775227
This is not an answer. I appreciate that this is not an ideal solution but as an IT manager with a very restricted budget I have to implemnt my companies requirements at limited cost. If it can be done that was what my question asked.
0
Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 

Author Comment

by:btp
ID: 1775228
You have to explain in detail what you want to do.

I see yours question as this:

You want to run TCP/IP together with IPX/SPX (Novell) on your WFW 3.11 workstation.
VLM and TCP/IP have nothing to do with each other. Its two differend protocols.
It is obvious possible to install TCP/IP together with IPX/SPX. You just have to install TCP/IP for WFW. You can find this as freeware on Microsoft WWW. If you cant find it, please send me a E-mail and then I will send it to you.

0
 
LVL 2

Accepted Solution

by:
jlu earned 100 total points
ID: 1775229
Thanks your suggestion but my clients are Win 3.11 NOT WFW I cant find the software for this version but know it can be done any Ideas ?
0
 

Author Comment

by:btp
ID: 1775230
I am confused, Win 3.11 is the same as Window For Workgroup (WFW).
If you are using standard Win 3.10, you got to use 3. part software like Newt (Netmanag TCPIP) or Reflection TCPIP.
If you have Win 3.11 NOT WFW are you the only one in the hole world.
Please tell me more about yours PC and configuration.
0
 
LVL 2

Expert Comment

by:jlu
ID: 1775231
Yes it is Win 3.00 but a very late release somtimes refered to as Win 3.11

Sorry for confusion

Is the 3 party software required in the Public Domaine or must it be purchased


0
 

Author Comment

by:btp
ID: 1775232
I and sure that you must buy 3 party TCPIP software for Win 3.0. I am sorry, but I dont think you cant get it anywhere for free.
I have only installed Newt (Netmanag TCPIP) client on oround 650 Win 3.10 workstation, but I am sure you can get this client for Win 3.0 also. You can probbably also get Reflection (WRQ) TCPIP for Win 3.0
I am sorry, but this must be the end of story !!!!!!
0

Featured Post

On Demand Webinar - Networking for the Cloud Era

This webinar discusses:
-Common barriers companies experience when moving to the cloud
-How SD-WAN changes the way we look at networks
-Best practices customers should employ moving forward with cloud migration
-What happens behind the scenes of SteelConnect’s one-click button

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I will show you HOW TO: Install VMware Tools for Windows on a VMware Windows virtual machine on a VMware vSphere Hypervisor 6.5 (ESXi 6.5) Host Server, using the VMware Host Client. The virtual machine has Windows Server 2016 instal…
No single Antivirus application (despite claims by manufacturers) will catch or protect you from all Virus / Malware or Spyware threats. That doesn't stop you from further protecting yourself however - and this article is to show you how.
The Task Scheduler is a powerful tool that is built into Windows. It allows you to schedule tasks (actions) on a recurring basis, such as hourly, daily, weekly, monthly, at log on, at startup, on idle, etc. This video Micro Tutorial is a brief intro…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

740 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question