[Last Call] Learn about multicloud storage options and how to improve your company's cloud strategy. Register Now

x
?
Solved

Event ID:8015 & 8033

Posted on 1997-04-11
2
Medium Priority
?
648 Views
Last Modified: 2013-12-23
Hi,
I just recently install a PC with NT3.5, after installed and configured suscessfully (I guess!) and reboot the machine and then relogin I check the Event Viewer, I see the following two events:
8015: The brower has forced an election on network \Device\Nbf_Elnkii1 because a Windows NT Server (or Domain master) brower is started.
8033: The brower has forced an election on network \Device\Nbf_Elnkii1 because a master brower was stopped.

Can anyone tell me what these two mean? Do they mean something wrong with my NT setup? (I have only on NT set as a master controller and with one domain and tried to connect to a PC with WIN 95 by TCP/IP through coax ethernet with 3COM EtherLink II (3C503) Cards.)
I am new to NT networking.
0
Comment
Question by:rchang
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 1

Accepted Solution

by:
jmataso earned 200 total points
ID: 1559737
Here is the way NT performs its network browsing (where the list comes from that is displayed when you pull up the file manager and see a list of machines).

The list is maintained by a Domain Master Browser, which is elected in the following order:
-PDC
-BDC(s)
-Domain Server
-NT Workstation
-95 Workstation
-WfWg 3.11 WS

Any of the above machines that are configured to automatically become the master browser (if needed) will force an election on the network, with the above priority list determining who wins.

That is the way things work in a NetBEUI network (single subnet), in a segmented network (routed TCP/IP, etc.), there is an additional step.  Each subnet has a master browser for its subnet, and then the master browser for each subnet forwards their browse list to the Domain Master Browser.

The browse list is maintained individual for each different protocol, so if you have more than one protocol installed on the server (or on a WS), you should see one of the above for each protocol.

I didn't understand the last part of your question, are you having problems connecting to the server from NT, or are you just wondering if there is a problem?

Respond and let me know if you need more info....

--->John
email: john.matasovsky@bigfoot.com
0
 

Author Comment

by:rchang
ID: 1559738
Thanks for the anwser.
0

Featured Post

Ask an Anonymous Question!

Don't feel intimidated by what you don't know. Ask your question anonymously. It's easy! Learn more and upgrade.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Sometimes you might need to configure routing based not only on destination IP address, but also on a combination of destination IP address (or hostname) and destination port number. I will describe a method how to accomplish this with free tools. …
This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Have you created a query with information for a calendar? ... and then, abra-cadabra, the calendar is done?! I am going to show you how to make that happen. Visualize your data!  ... really see it To use the code to create a calendar from a q…

650 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question