Solved

Is OS/2 limited to 57600 baud?? I want 115200!

Posted on 1997-04-12
2
275 Views
Last Modified: 2013-12-27
I have problems with the serial speed
when connecting to my ISP, I use InJoy
but it's the same with DOIP.
I can connect using Windows NT (on the
same machine) and everything works fine
but with OS/2 it is VERY slow.
The solution is to adjust the baudrate
from 115200 to 57600, then I get a
decent connection but I would like to
use 115200.
My modem (Lasat 28.8 voice capable of
33.6) does work as it should, I've had
a lot of help with init strings and
testing from Lasat support.
I use the SIO drivers latest version
1.60d. I even wrote to Ray Gwinn who
suggested that I locked the baudrate at
115200 but it did not help.
The UART on the comport is reported to
be an 16550A by SIO.
The modem connects with 115200 but is
seems that there are a lot of bad
packets in this speed. When I force my
modem to 57600 it works very well.
Has anyone out there any idea what
might the problem?
TIA
Leslie Jensen
0
Comment
Question by:lesjen
2 Comments
 

Author Comment

by:lesjen
ID: 1805725
Edited text of question
0
 

Accepted Solution

by:
lynnHo earned 200 total points
ID: 1805726
Try adding the following to your config.sys (near the end).
Remember, the PORT speed (115200) is how fast data is transferred between your modem and your machine (not the line speed).  Are there other (DOS/WINDOZE) programs running that
might share the com port.

Change the COM2 to to COMx for your installation:


CALL=C:\OS2\MODE.COM COM2:115200,N,8,1,TO=OFF,XON=OFF,OCTS=ON,RTS=HS,DTR=ON,IDSR=OFF,ODSR=OFF,BUFFER=ON


This is all one line!
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Just about everyone has an old PC laying around.  Ask anyone in the IT industry, whether they are a professional or play in it as a hobby.  From outdated Desktops to cheap "throwaway" laptops, they are all around and not as hard to "fix up" as you m…
#Citrix #POC #XenDesktop #vCenter #VMware #ESX
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…
Hi friends,  in this video  I'll show you how new windows 10 user can learn the using of windows 10. Thank you.

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question