INETCFG setup

On my 4.11 server there are 4 NIC:
E0, E3, E4, E5 are IPX 802.2 Network
E0000000, E0000003, E0000004, E0000005 are IPX 802.3 Network
100-100, 203-203, 204-204, 205-205, ... are AppleTalk Fase2 Network
192.168.0.x; 192.168.3.x; 192.168.4.x; 192.168.5.x are TCP/IP networks (i'm using 255.255.255.0 netmask)
TCP/IP Forward is enabled.
TCP/IP is loaded as "router" and not "end node".
 
AppleTalk and IPX networks are working fine (server is routing packets).
TCP/IP protocol is loaded on all  NIC without any error.
I'm not able to ping from a workstation in a network to a workstation in another network! Seems that server is not routing packets.

There is someone able to:
- Give me exact information to setup TCP/IP protocol on NW4.11 using INETCFG?
- Give me exact information to setup TCP/IP on W95 wks?
I need to have TCP/IP protocol loaded on every workstation and and I need to be able to ping every workstation on every network from every workstation on every network!

Please note that gateway address on W95 is already setup as the IP number of the server NIC on the same subnet (example: wks 192.168.3.104 have gateway address setup as 192.168.3.5).

Thanks in advance.
Giorgio