Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

33.6 modem setup

Posted on 1997-04-18
7
Medium Priority
?
184 Views
Last Modified: 2013-12-16
I have just installed osr2 and windows doen't recognize the 33.6 Auslinx modem. It will boot and recognize the modem as a standard 28.8 modem but come up wanting software for a 33.6 modem. Does anybody know how to set up a 33.6 modem or where to get the drivers for this modem?
0
Comment
Question by:sylvrynn
  • 2
  • 2
  • 2
  • +1
7 Comments
 
LVL 2

Accepted Solution

by:
stuartc010297 earned 100 total points
ID: 1745501
The modem is set up properly, 33.6 is a new standard as far as Win 95 is concerned..For the drivers I'd try the manufactorer or a good search engine..Maybe one is posted somewhere.After the drivers are loaded, you will probably see a connection rate of 24000bps..this is normal, as most 33.6 drivers use this as a base point (if you will) to upgrade from..(
0
 

Expert Comment

by:Rustymon
ID: 1745502
Yes I know the modem is set up properly but how do I get rid of the error message ??
0
 

Expert Comment

by:Rustymon
ID: 1745503
Need More INfO stuartc....??
0
Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 
LVL 2

Expert Comment

by:stuartc010297
ID: 1745504
The boot is recognizing the modem, but is missing the 33.6 drivers, and is asking for them..I'd try deleting the modem, and reinstalling it as a standard modem (generic) until you get the drivers..This will remove the search (error) for the new drivers..

0
 

Expert Comment

by:bigstar
ID: 1745505
I too have 33.6 MODEM that Win'95 OSR2 Device Manager recognizes as a 28.8 Rockwell PCMCIA (PCMCIA it certainly isn't). The modem seems to work OK, but I'd love to know if I'm getting the performance I should from it. How do I tell?
0
 

Author Comment

by:sylvrynn
ID: 1745506
I finally tracked down the manufacturer of my modem on the web and got new drivers for it but the I've since been told that windows calls it 28.8 but will allow it to operate much faster than this (up to 115200). Don"t know if this is true.
0
 

Expert Comment

by:bigstar
ID: 1745507
sylvrynn

Yes, well that's what happens with my 33.6 Modem also. Win'95 tells me it's running at 115200, but Windows still calls it 28.8.
I'd love to know exactly what's going on here. If you find out let me know

Cheers
0

Featured Post

[Webinar] Cloud and Mobile-First Strategy

Maybe you’ve fully adopted the cloud since the beginning. Or maybe you started with on-prem resources but are pursuing a “cloud and mobile first” strategy. Getting to that end state has its challenges. Discover how to build out a 100% cloud and mobile IT strategy in this webinar.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article shows how to use a free utility called 'Parkdale' to easily test the performance and benchmark any Hard Drive(s) installed in your computer. We also look at RAM Disks and their speed comparisons.
The article covers five tools all IT professionals should know about, as they up productivity by a great deal!
This video Micro Tutorial explains how to clone a hard drive using a commercial software product for Windows systems called Casper from Future Systems Solutions (FSS). Cloning makes an exact, complete copy of one hard disk drive (HDD) onto another d…
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…

877 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question