Solved

asppp and solaris 2.5

Posted on 1997-04-23
2
345 Views
Last Modified: 2013-12-16
I am running solaris 2.5 on a sparc 5. asppp is working fine but when I ftp download a one meg file to a server it takes about one minute, when I upload the same file to my sparc it takes only 30 seconds. I am using a 33.6 modem, my isp 28.8 max. Is this the modem or my isp or my setup in my "/etc/remote" file" or other... thanks
0
Comment
Question by:rallard
2 Comments
 
LVL 2

Accepted Solution

by:
pxh earned 50 total points
ID: 1812058
This is a problem related to network tuning in solaris 2.5. Try the following commands:

ndd -set /dev/tcp tcp_rexmit_interval_initial 3000
ndd -set /dev/tcp tcp_rexmit_interval_min 6000
ndd -set /dev/tcp tcp_mss_max 536

This helped on my machine. You still may need to play with those numbers,
but I doubt it. I think there is also a patch from Sun for it. If you can't get along with the fast remedy above, let
me know, I will then supply you with the patch ID.

Good luck,

Peter (pxh@mpe-garching.mpg.de)

0
 

Author Comment

by:rallard
ID: 1812059
Your answer fixed my problem immediatly. Thanks. Could you please supply me with the patch ID, I stop and start my sparc everyday so at the moment I will create a shell for the fix.

Thanks again.
Rick
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

FreeBSD on EC2 FreeBSD (https://www.freebsd.org) is a robust Unix-like operating system that has been around for many years. FreeBSD is available on Amazon EC2 through Amazon Machine Images (AMIs) provided by FreeBSD developer and security office…
Why Shell Scripting? Shell scripting is a powerful method of accessing UNIX systems and it is very flexible. Shell scripts are required when we want to execute a sequence of commands in Unix flavored operating systems. “Shell” is the command line i…
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
In a previous video, we went over how to export a DynamoDB table into Amazon S3.  In this video, we show how to load the export from S3 into a DynamoDB table.

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now