Solved

LCP Error and PPP

Posted on 1997-05-08
5
653 Views
Last Modified: 2011-10-03
I am now using RH 4.1, I had used RH 3.03 and Slackware 3.0 wich both worked well. Here is what I now get when I try to dial up. As you can see I put as much error logging on as I could so this is quite long. If soneone would examine this and give me some help.

 Thank you so much in advance.

May  5 20:30:10 daveb kernel: PPP: ppp line discipline successfully
unregistered
May  5 20:31:52 daveb kernel: CSLIP: code copyright 1989 Regents of the
University of California
May  5 20:31:52 daveb kernel: PPP: version 2.2.0 (dynamic channel
allocation)
May  5 20:31:52 daveb kernel: PPP Dynamic channel allocation code
copyright 1995 Caldera, Inc.
May  5 20:31:52 daveb kernel: PPP line discipline registered.
May  5 20:31:52 daveb kernel: registered device ppp0
May  5 20:31:53 daveb pppd[541]: pppd 2.2.0 started by root, uid 0
May  5 20:31:54 daveb chat[542]: abort on (BUSY)
May  5 20:31:54 daveb chat[542]: abort on (NO CARRIER)
May  5 20:31:54 daveb chat[542]: send (ATDT8850009^M)
May  5 20:31:54 daveb chat[542]: expect (login:)
May  5 20:32:13 daveb chat[542]: ^M
May  5 20:32:39 daveb chat[542]: alarm
May  5 20:32:39 daveb pppd[541]: Connect script failed
May  5 20:32:39 daveb pppd[541]: Exit.
May  5 20:32:39 daveb chat[542]: Failed
May  5 20:33:52 daveb kernel: PPP: ppp line discipline successfully
unregistered
May  5 20:42:20 daveb kernel: CSLIP: code copyright 1989 Regents of the
University of California
May  5 20:42:20 daveb kernel: PPP: version 2.2.0 (dynamic channel
allocation)
May  5 20:42:20 daveb kernel: PPP Dynamic channel allocation code
copyright 1995 Caldera, Inc.
May  5 20:42:20 daveb kernel: PPP line discipline registered.
May  5 20:42:20 daveb kernel: registered device ppp0
May  5 20:42:21 daveb pppd[583]: pppd 2.2.0 started by root, uid 0
May  5 20:42:22 daveb chat[584]: abort on (BUSY)
May  5 20:42:22 daveb chat[584]: abort on (NO CARRIER)
May  5 20:42:22 daveb chat[584]: send (ATDT8850009^M)
May  5 20:42:22 daveb chat[584]: expect (login:)
May  5 20:43:01 daveb chat[584]: ATDT8850009^M^M
May  5 20:43:01 daveb chat[584]: ^M
May  5 20:43:01 daveb chat[584]: login: -- got it
May  5 20:43:01 daveb chat[584]: send (daveb^M)
May  5 20:43:01 daveb chat[584]: expect (Password:)
May  5 20:43:10 daveb kernel: Swansea University Computer Society IPX
0.34 for NET3.035
May  5 20:43:10 daveb kernel: IPX Portions Copyright (c) 1995 Caldera,
Inc.
May  5 20:43:10 daveb kernel: Appletalk 0.17 for Linux NET3.035
May  5 20:43:21 daveb chat[584]:  daveb^M
May  5 20:43:21 daveb pppd[583]: Serial connection established.
May  5 20:43:21 daveb chat[584]: Password: -- got it
May  5 20:43:21 daveb chat[584]: send (xxxxx^M)
May  5 20:43:31 daveb kernel: ppp_tty_ioctl: set flags to 70000
May  5 20:43:31 daveb kernel: ppp_tty_ioctl: set flags to 70000
May  5 20:43:31 daveb kernel: ppp_tty_ioctl: set xasyncmap
May  5 20:43:31 daveb kernel: ppp_tty_ioctl: set xmit asyncmap ffffffff
May  5 20:43:31 daveb kernel: ppp_tty_ioctl: set flags to 9070000
May  5 20:43:31 daveb kernel: ppp_tty_ioctl: set mru to 5dc
May  5 20:43:31 daveb kernel: ppp_tty_ioctl: set rcv asyncmap 0
May  5 20:43:31 daveb kernel: ppp_tty_ioctl: set flags to 9070010
May  5 20:43:31 daveb pppd[583]: Using interface ppp0
May  5 20:43:31 daveb pppd[583]: Connect: ppp0 <--> /dev/modem
May  5 20:43:48 daveb login: ROOT LOGIN ON tty2
May  5 20:43:52 daveb kernel: ppp_dev_stats called<7>ppp: write frame,
count = 22
May  5 20:44:01 daveb pppd[583]: LCP: timeout sending Config-Requests
May  5 20:44:41 daveb kernel: ppp: channel ppp0 closing.
May  5 20:44:41 daveb pppd[583]: Hangup (SIGHUP)
May  5 20:44:41 daveb pppd[583]: Modem hangup
May  5 20:44:41 daveb pppd[583]: Connection terminated.
May  5 20:44:41 daveb pppd[583]: Exit.

0
Comment
Question by:bubarda
5 Comments
 
LVL 2

Expert Comment

by:mlev
ID: 1584609
Many dialup servers only enter PPP after "ppp\n" is sent to them.
Are you sure yours doesn't?
0
 

Author Comment

by:bubarda
ID: 1584610
I know my ISP (www.netheaven.com) starts the pppd because when I use minicom to establish the connection after I login I get
"pppd started between xxx.xx.xx.xxx and yyy.yyy.yy.yy ##$#@$# $@$#@$$%$#>.%#$%^" {or what ever the gobbldygook it shows on the screen when it is running} Then it hangs up, I check the log and another LCP error. I did NOT have this trouble with RH3.03 or Slackware '96.
0
 
LVL 2

Accepted Solution

by:
jprohart earned 130 total points
ID: 1584611
use pppd vervion 2.0f or later (i use 2.3B3). ver2.2.0 don't work with recent kernels (from kernel 2.0.18 i think)
email me if you want me to send my ppp-on script for example.

bye
0
 

Author Comment

by:bubarda
ID: 1584612
Let me give that a try.
0
 

Expert Comment

by:LinuXGoD
ID: 1584613
The answer to this question is to add "silent" to the Option
file in "/etc/ppp" what is happening is pppd is trying to transmit LCP packets to initiate a connection until a valid LCP packet is received from the peer, by adding "silent" to options file it will not try to do this.

This is also good for Cable Modems
0

Featured Post

Master Your Team's Linux and Cloud Stack!

The average business loses $13.5M per year to ineffective training (per 1,000 employees). Keep ahead of the competition and combine in-person quality with online cost and flexibility by training with Linux Academy.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Reaching outside NTP servers from within a domain? 12 103
Open BDS Pf 3 50
Squid Connection Pools 3 70
Replication of files from Primary and the Secondary Linux servers 14 124
I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
This video shows how to quickly and easily add an email signature for all users on Exchange 2016. The resulting signature is applied on a server level by Exchange Online. The email signature template has been downloaded from: www.mail-signatures…
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question