?
Solved

Problem with Connection to ISP

Posted on 1997-05-11
1
Medium Priority
?
245 Views
Last Modified: 2010-03-18
Hi guys,

i´m really new at Linux but i managed to set it up in my Localnet and now i wnat it to connect to my ISp using PPP with PAP.
No Problem i really can get a connecvtion to my ISP an can ftp to it and all other things like connecting to ftp servers and so on. But te problem i have is when i make a ping every 2. packet is lost! And the connect rate to the ftp server from my ISP is only 0.25 K max. Normaly it is 7.0K (i use a external USR ISDN TA).

Can anyone of you guys please help me????

Cya,

            Chris
0
Comment
Question by:black_
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 19

Accepted Solution

by:
xterm earned 300 total points
ID: 1584635
try (before connecting):  setserial /dev/cua? spd_vhi
(where cua? is the appropriate serial port that your TA is
on.)

Since you are making a good connection to your ISP, you can
have them look at the logs for their terminal server, and tell
you what is happening with your connection.  

You might also turn on debugging, and see what your syslog
reports.  Are you connecting at 115,200?  For ISDN, I'd also
set a few additional pppd options 1) mru 556 and 2) -vj (disable
Van Jacobsen CSLIP compression.)  These two things significantly
improved my performance (I use a Bitsurfer though, but these
are recommended for any TA afaik)
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question