Solved

tcpview for Solaris2.5.x

Posted on 1997-05-15
1
645 Views
Last Modified: 2013-12-23
I am looking for the tcpview of Public Domain software that will work
in Solaris 2.5.x.  Does anyone know if there is the tcpview ?

I guess that it is difficult to install the tcpview-1.0.tar.Z to
Solaris 2.5.x. The tcpview-1.0.tar.Z is gotten from
ftp.cac.washington.edu

I know that snoop(1m) in Solaris 2.5.1 provides the same functionality
as tcpdump, but it doesn't have any graphical user interface.  And
then the Sun User Group SECURITY CD-ROM containes a tcpview, but it is
commercial, and I'm not sure that it is for Solaris 2.5.x.
0
Comment
Question by:ohno
1 Comment
 
LVL 1

Accepted Solution

by:
henrys earned 50 total points
ID: 1582070
Try packetman available from ftp:cs.curtin.au
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How to configure this IP Address to my firewall 15 105
Application timeout question 2 36
Measure data usage per hotspot, on computer 3 50
Cisco WAP POE power 28 72
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question