lennart
asked on
CD-ROM sharing
I use Netware 3.12 and in the the server i have a TEACCD-56E 8-spin.
My config looks like this:
STARTUP.NCF
Load NPAPATCH
Load IDEATA port=1F0 int=E
AUTOEXEC.NCF
file server name SP
ipx internal net 33340C06
load NE2000 port=300 int=4 FRAME=ETHERNET_802.2
bind IPX to NE2000 net=1
load nut
load monitor.nlm
load after311.nlm
load cdrom.nlm
load remote 326
load rspx
mount all
Booting the server I can see the following:
CDM autoloader enabled
Loading module IDECD.CDM
Novell ATAPI CDROM CDM
0.0.0 IDECD.CDM-001: WARNING! This driver has not been certified with TEAC
64E FW:1.0D device however the drive has bound to the device and will
attempt to provide support. USE AT YOUR OWN RISK !
Writing "CD DEVICE LIST" at the console gives:
** CD ROM Device List
No Act Device Name Volume name Mounted
1 Y [VO25-A0-D1:1] TEAC CD-64E FW:1.0D N
and "CD MOUNT 1" gives:
CDROM-4.11-275:INFO
No Volume information found, mount has failed
I suppose the conclusion must be that I am using the wrong Netware
CD-driver, But is there any right and if so, where can I get it ???
My CDROM.NLM is the latest update
Would appreciate some help
Len
My config looks like this:
STARTUP.NCF
Load NPAPATCH
Load IDEATA port=1F0 int=E
AUTOEXEC.NCF
file server name SP
ipx internal net 33340C06
load NE2000 port=300 int=4 FRAME=ETHERNET_802.2
bind IPX to NE2000 net=1
load nut
load monitor.nlm
load after311.nlm
load cdrom.nlm
load remote 326
load rspx
mount all
Booting the server I can see the following:
CDM autoloader enabled
Loading module IDECD.CDM
Novell ATAPI CDROM CDM
0.0.0 IDECD.CDM-001: WARNING! This driver has not been certified with TEAC
64E FW:1.0D device however the drive has bound to the device and will
attempt to provide support. USE AT YOUR OWN RISK !
Writing "CD DEVICE LIST" at the console gives:
** CD ROM Device List
No Act Device Name Volume name Mounted
1 Y [VO25-A0-D1:1] TEAC CD-64E FW:1.0D N
and "CD MOUNT 1" gives:
CDROM-4.11-275:INFO
No Volume information found, mount has failed
I suppose the conclusion must be that I am using the wrong Netware
CD-driver, But is there any right and if so, where can I get it ???
My CDROM.NLM is the latest update
Would appreciate some help
Len
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
The novell cd system is only for ISO cd's.