Solved

NetWare Lite 1.1 + Windows 95

Posted on 1997-05-24
5
1,042 Views
Last Modified: 2013-12-23
How can I make connection and local resources sharing between two computers on LAN:

1.) MS-DOS (ver. 6.22) + NetWare Lite (ver. 1.1)
2.) Windows 95

I installed IPX/SPX protocol and Microsoft Client for NetWare Networks on Windows 95 and started NWLite on other computer but they cannot connect to each other !?
0
Comment
Question by:Stjepan Brbot
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 4

Expert Comment

by:henrie
ID: 1544226
Sorry, to my knowledge Client for Netware only works with real servers. You could try installing Win3.11 on the Dos machine and load client for Microsoft networks on both machines.

Hope this helps...

0
 

Author Comment

by:Stjepan Brbot
ID: 1544227
I want NWLite 1.1 and Win95 !
0
 
LVL 4

Accepted Solution

by:
henrie earned 30 total points
ID: 1544228
OK, so I said windows95 doesn't support NWLite.
But... You could try loading the 16 bit realmode drivers in autoexec and try to connect. I Know for sure Novell does NOT support NWLite. They give an installation proposal for Personal Netware on their pages, though.
Maybe you should follow this setup and try. Go to:
http://support.novell.com/home/desktop/pnw
type 95 in the search engine and choose the option found:
"Integrating Personal Netware and Windows 95"

Good luck.

0
 

Author Comment

by:Stjepan Brbot
ID: 1544229
Yes, I know too that Novell Netware and NWLite use different network drivers and if you want connect Novell Netware with NWLite you should have two drivers in memory in the same time.
Real mode drivers in AUTOEXEC.BAT is probably right answer. I'll try it!
                                                             Stjepan Brbot
0
 

Author Comment

by:Stjepan Brbot
ID: 1544230
I know too that Novell Netware and Netware Lite 1.1 use different networking drivers and that if you want connect Novell Netware with Netware Light 1.1 networks you should have two drivers in memory in the same time!
Real mode driver in Windows 95 AUTOEXEC.BAT is prpbably right answer and I'll try it !
                                                         Stjepan Brbot
0

Featured Post

Save the day with this special offer from ATEN!

Save 30% on the CV211 using promo code EXPERTS30 now through April 30th. The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Sometimes you might need to configure routing based not only on destination IP address, but also on a combination of destination IP address (or hostname) and destination port number. I will describe a method how to accomplish this with free tools. …
Have you ever set up your wireless router at home or in the office to find that you little pop-up bubble in the bottom right-hand corner of Windows read "IP Conflict - One of more computers on the network have been assigned the following IP address"…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question