Solved

Sound card initialization error

Posted on 1997-05-31
3
375 Views
Last Modified: 2013-12-15
When booting I get the following messages...
 Sound initialization started
 sb: Interrupt test on IRQ5 failed - device disabled
 <Yamaha OPL3 FM> at 0x388
The sound card that I have is AZTECH AZT2316R that came with 2 diskettes labelled MM PRO 16 IIA-3D EP, with no manual :(
I have gened the kernel for Sound Blaster compatibility. The sound card works fine under DOS, and works ok under Linux if DOS initializes the sound card before I boot Linux. The SOUND HOW-TO indicates an incorrect driver has been used. Anyone know which driver to use with this card? Thanks.
0
Comment
Question by:t2pp
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 2

Accepted Solution

by:
jprohart earned 100 total points
ID: 1627730
it seems like your sound card is plugn'play. In order to use it, you must configure it at boot time. You can try to use pnp configuration utility for linux. Look at : http://www.redhat.com/linux-info/pnp/software.html


bye
0
 
LVL 1

Author Comment

by:t2pp
ID: 1627731
jprohart - the card is not pnp. I have the jumpers set at the standard settings. I guess this is why DOS dosen't have any problems.
0
 
LVL 2

Expert Comment

by:jprohart
ID: 1627732
try the cs4232 driver, i think (and hope ) it will work. Otherwise, boot your machine from dos (with the card configuration utility) and then boot linux with loadlin. In last extremity, this wiil solve your problem.
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

The purpose of this article is to demonstrate how we can use conditional statements using Python.
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Learn several ways to interact with files and get file information from the bash shell. ls lists the contents of a directory: Using the -a flag displays hidden files: Using the -l flag formats the output in a long list: The file command gives us mor…
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
Suggested Courses

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question