Solved

Cisco-Like Features on Linux ? Like NAT

Posted on 1997-06-03
2
190 Views
Last Modified: 2010-03-17
Does it exist cisco-like features on linux:

 - N.A.T - Network Adress Translation (Dynamic IP)
 - Per interface Bandwidth limit
 - High speed (2Mb/s) IP serial links

If not, is it really difficult to write these features ?
0
Comment
Question by:delete060397
2 Comments
 
LVL 1

Accepted Solution

by:
rfedane earned 100 total points
ID: 1584774

NAT is called IP firewall on Linux. You will need to build
support in the kernel for it. And then set up the Linux
machine a a gateway/firewall. The instruction on this is
available in the How-to docs and FAQ on www.linux.org.

To the best of my knowledge there is no  software available
to limit bandwidth.

High speed links are hardware issues, and first you would need to
find a PC card that supports 2Mb/s links like a Cisco 252x. In
which case you bought yourself a Cisco with all the features above anyways :-)
0
 

Author Comment

by:delete060397
ID: 1584775
1 - The Linux Firewall with IP Masquerade are not really an IP/Network Adresses Translator. But yesterday, i've found a NAT for Linux beta program at the following URL:

**** http://www.csn.tu-chemnitz.de/~mha/linux-ip-nat/ ****
I hope this project will become a must, like masquerade :-)

2 - There's an available program to limit bandwidth but only for wu-ftp daemon for linux with a recent patch. It allow per-user bandwidth limitation. JYoungman@vggas.com has say me that is an available bandwith limit driver for 2.1.x linux developpment kernel called "shape driver" but i've not found this in my 2.1.8 (?)

3 - I now the method but i searching for linux-supported hardware list for this High speed serial links.

4 - I'm Sorry for my poor english ;-)

5 - Can i grade or give point to myself ? !!!!!!!!
0

Featured Post

Maximize Your Threat Intelligence Reporting

Reporting is one of the most important and least talked about aspects of a world-class threat intelligence program. Here’s how to do it right.

Join & Write a Comment

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Access reports are powerful and flexible. Learn how to create a query and then a grouped report using the wizard. Modify the report design after the wizard is done to make it look better. There will be another video to explain how to put the final p…
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

9 Experts available now in Live!

Get 1:1 Help Now