Solved

AT&T Worldnet PPP Connection

Posted on 1997-06-13
2
328 Views
Last Modified: 2006-11-17
As a relative newbie to unix/linux I have installed Slackware 3.1 on my
machine.  I found some instructions on the net somewhere that described
how to set up a PPP connection for AT&T Worldnet.  When I run the ppp-on
perl script they provided, it appears that the computer is trying to do
something, but it gives me about 5 lines of repeating jibberrish text
before quitting.  Anyone have any suggestions?  If I didn't provide
enough info, let me know.
Brian
0
Comment
Question by:Brian999
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 3

Expert Comment

by:sauron
ID: 1584856
What does the script do? Are you using a terminal mode login, or CHAP/PAP authentication? Are you using chat to dial the modem? whats the contents of the chat script if so.....
0
 

Accepted Solution

by:
wittusen earned 100 total points
ID: 1584857
Hi
I dont know if this is the answer u are looking for, but anyway here we go.

In order to make a connection to someone (ISP), u need to prepare a chat-script that contains a list of commands used to communicate with the slip server at login time.

The command u then have to use after writing the chat-script (or  as its called dip script) is dip, the dip command is located under /etc/dip/ probably.
If u run dip with the -v option it will print the debugging information for u, in case something goes wrong u can see that.

Now if I would to write that dip -script it would take a bit of space, so the best thing u can do is to run this command, man dip and u can there find a script e.x, pipe the man dip to a file, u can then cut and paste that script e.x to a empty file.

Hope this was what u where looking for.

/Christer
webmaster@dtc.se
0

Featured Post

Optimum High-Definition Video Viewing and Control

The ATEN VM0404HA 4x4 4K HDMI Matrix Switch supports 4K resolutions of UHD (3840 x 2160) and DCI (4096 x 2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0). It is ideal for applications where the routing of 4K digital signals is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

630 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question